Installation Guide

1.Install 3 extension support
brackets provides in the kit.
2.Clamp in place, the extension panel to the
walk in tub shell, lining up the facade of top
and front.
3.Pre-drill (+3/8") slightly wider holes than
mounting screws to allow for final
adjustment to the panel.
4.Mount extension with 7 screws, washers
and bolts.
5.Apply Silicone or white caulking as needed.
Economy Dimensions: 7"W x 29 1/2"L x 371/2a"H
L" Stainless Steel Brackets ...........................Qty
(3) L" Acrylic Bracket ........................................Qty
(1)
1" x 1/8" Bolts ...............................................Qty (7)
1" x 1/4" Bolts ...............................................Qty (7)
1" Screw .......................................................Qty (1)
1/2" Nuts .......................................................Qty (9)
3/8" Nuts .......................................................Qty (7)
Medium Washers .........................................Qty
(14) Small Washers
..............................................Qty (14) Plastic
Washer .............................................Qty (1) Plastic
Cap ...................................................Qty (1)
The extension kit can be instal
led as needed. Opening can be filled as desired.
Reversible Extension Kit
3.& 4.
Mount 2 Extension Panel Clips
ellasbubbles.com
3/22/23
Page 15 of 24