Installation Guide

8.
9.
-Insert the small wall jamb 8HD07 into magnetic sealer 8HD06.
- Adsorb the two strip onto the sliding panel and close the door to the
wall and mark the position of the small wall jamb.
- Apply silicone on the back of sliding guide 8HD23.
-Put it right next to the fixed glass panel.
-Put the sliding glass panel on the rail profile to make sure bottom
edge on the channel of sliding guide.
L
8HD23
L R
X 1
8HD06
X 1
8HD07
X 1
8
8HD23
8HD23
8HD07
8HD06