Installation Guide

Table Of Contents

Halo screen is reversible for Left hand and Right hand. But the mounting instruction

is the same for both directions. Below step is followed by right hand. For left hand,

please follow below steps in mirror direction.

- Measure the wall with spirit level to make sure the wall is vertical.

a. Put the wall profiles 8HD01 against the wall, ensuring the distance

between the profile and the bath edge is correct.

Adjust the profile to make sure it is vertical by using a spirit level.

Mark the holes on the wall.

b. At the right side of the wall profile, mark the holes position of the rail

profile seat by using tool 8HD15.

c. Drill the holes (∮6mm) according to the marks and insert the wall

plugs 8HD11(6X) into the holes.

d. Apply silicone down the whole length on the back of wall profile

8HD01.

e. Fixing wall profile on the wall with screws 8HD12(4X)

and the screw washers 8HD26(4X).

f. Fix rail profile seat 8HD20 on the wall with screws 8HD13(2X).

8HD01

8HD15

X 1

X 6

ST4X40

8HD13

8HD12

8HD11

X 4

X 2