Installation Guide
12.
13.
Roller adjustment:
-From inside of the cabine, take off the back cover from the roller.
-Turn the nut of the roller with tool 8HD14 until the door is vertical
against the magnetic seal well.
-Fasten both rollers and put the covers back.
-Apply silicone on the back of aluminium anti-water strip 8HD10
and strip cover 8HD22.
-Insert 8HD10 into the hole of sliding guide 8HD23.
- Put 8HD22 cover on the other end.
8HD10
X 1
8HD22
X 1
8HD14
X 2
10
8HD22
8HD10
NO
YES