Installation Guide

10.
11.
-Mount anti-jump parts 8HD18(2X) on the sliding glass panel to
keep distance with 1~2mm to rail profile.
- Apply vertical seal 8HD04(1X) on the sliding door and cut under
the rail profile.
- Apply vertical seal 8HD04(1X) on the fix panel and cut under the
anti-jump stopper.
-Apply magnetic seal 8HD06 on the small wall jamb 8HD07.
- Put top cap 8HD21 onto the wall profile.
- Separate the small wall jamb 8HD07 and magnetic seal 8HD06.
- Put small wall jamb 8HD07 on the wall against the mark.
- Mark and drill the holes accordingly.
- Insert wall plugs 8HD11(4X) into the holes.
- Fix small wall jamb 8HD07 on the wall with screws 8HD12(4X).
8HD07
X 1
X 1
8HD06
8HD06
X 2
X 1
φ6
X 4
ST4X40
8HD12
8HD11
X 4
1-2MM
8HD18
8HD04
X 2
X 1
8HD21
9
8HD12
8HD07
8HD06
8HD11
8HD06
8HD21
8HD04a
8HD18
8HD04b