Installation Guide

LH
RH
Halo screen is reversible for Left hand and Right hand. But the mounting instruction
is the same for both directions. Below step is followed by Right hand. For left hand,
please follow below steps in mirror direction.
4
1.
c
d
e
- Measure the wall with spirit level to make sure the wall is vertical.
a. Put the wall profile 6HD01 against the wall, ensuring the distance
between the profile and the base edge is correct.
Adjust the profile to make sure it is vertical by using a spirit level.
Mark the fastening holes on the wall.
b. Drill the holes (∮6mm) according to the marks and insert the wall
plugs 6HD11(6X) into the holes.
d. Apply silicone down the whole length on the back of wall profile
6HD01.
e. Fixing wall profile on the wall with screws 6HD12(4X)
6HD01
X 1
X 4
ST4X40
6HD12
6HD11
X 4
6HD01
6HD11
6HD12
4X
4X
b
φ6mm
a
0.39"(10mm)
4X