Installation Guide
10.
11.
9
-Put the sliding glass panel 6HD05 on the rail profile to make sure bottom edge on the channel of
sliding guide.
Roller adjustment:
-From inside of the cabine, take off the back cover from the roller.
-Turn the nut of the roller with tool 8HD14 until the door is vertical against the magnetic seal well.
-Fasten both rollers and put the covers back.
6HD03
6HD05
6HD03
6HD05
-Mount anti-jump part 6HD18(2X) on the sliding glass panel to
keep distance with 1~2mm to rail profile.
- Put top cap 6HD21 onto the wall profile.
6HD18
X 2
X 1
6HD21
1-2MM
6HD18
6HD21