WIRELESS SHUTTER CONTROL EN (LUXURY VERSION) Combination of iNELS wall-mounted wireless controller and shutter switching device.
Package Glass touch controller - 4 buttons, SHARP RFGB-40/W, RFGB-40/B Glass touch controller - 4 buttons, ROUND RFGB-240/W, RFGB-240/B Switch unit for shutters RFJA-32B-SL EAN EAN EAN EAN 8595188183154 (Glass touch controller - 4 buttons, BLACK SHARP + Switch unit for shutters) 8595188183161 (Glass touch controller - 4 buttons, WHITE SHARP + Switch unit for shutters) 8595188183178 (Glass touch controller - 4 buttons, BLACK ROUND + Switch unit for shutters) 8595188183185 (Glass touch controller - 4 button
Glass touch controller - 4 buttons, SHARP/ROUND, RFGB-40/RFGB-240 Detailed manual RFGB-40/B – glass touch controller, SHARP - black, 4-buttons RFGB-40/W – glass touch controller, SHARP - white, 4-buttons RFGB-240/B – glass touch controller, ROUND - black, 4-buttons RFGB-240/W – glass touch controller, ROUND - white, 4-buttons RFGB-40 Characteristics RFGB-240 • The wireless control - used to control, lights, gate, garage door, shitters, etc. • Thickness only 8 mm.
Assembly Adhesive Peel off one protective layer on the doublesided adhesive sheets and stick them to the marked places on the controller. Peel off the second protective layer on the doublesided adhesive sheets and place the control in the prepared place.
Technical parameters Power voltage: Battery life: Transmission indication Number of capacitive buttons: Communication Protocol: Frequency: Signal transmission method: Range: Material: RFGB-40/RFGB-240 2x 3 V battery CR 2032 about 2 years depending on the frequency of use Red LED 4 RFIO2 868.5 MHz one-way addressed message in the open up to 200 m Glass Other data Operating Temperature: Working Position -10 ... +50 °C (14 ...
Notes ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ......................
Detailed manual Switch unit for shutters RFJA-32B-SL Characteristics RFJA-32B-SL • The switching unit for blinds has 2 output channels used to control garage doors, gates, blinds, awnings, etc… • It can be combined with system components iNELS RF Control2 with RFIO2 protocol. • The BOX design lets you mount it right in an installation box, a ceiling or motor drive cover.
Technical parameters RFJA-32B-SL Supply voltage: 230 V AC / 50 - 60 Hz Apparent input: 7 VA / cos φ = 0.1 Dissipated power: Supply voltage tolerance: 0.7 W +10 -15 % Output: Number of contacts: Rated current: Switching power: 2x switching (AgSnO2) 8 A / AC1 2000 VA / AC1 Peak current: 10 A / <3 s Switching voltage: 250 V AC1 Control: RF, by command from transmitter: Manual control: 868.5 MHz PROG (STOP, , STOP, ) Other data: Operating temperature: Operating position: -15 ... + 50 °C (5 ...
Connection S S N L M L N PE Indication, manual control •LED STATUS - indication of the device status. • Manual control is performed by pressing the PROG button. • Programming is performed by pressing the PROG button for more than 1s. • Terminal block for connection of buttons. IN1 - direction button up IN2- button down. In the programming and operating mode, the LED on the component lights up at the same time each time the button is pressed - this indicates the incoming command 1 1. 2. 3. 4. 5. 6.
Radiofrequency signal penetration through various construction materials x RFRP-20 Range up to 200 m in open space, if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature.
