Technical data

57
eLAN-RF-003 eLAN-RF-Wi-003
RF
RF
AN
AN
T.
T.
868MHz
868MHz
Compatible
Compatible
OASIS & Touch
ETHERNETUSB
RESET
POWER
ETHERNETUSB
RESET
POWER
eLAN-RF-003
switch
eLAN-RF-Wi-003
w
i
tch
s
Smart box - ethernet converter to RF signal eLAN-RF-003, eLAN-RF-Wi-003
The smart boxes eLAN-RF-003 and eLAN-RF-Wi-003 are also used to control wireless
actuators of iNELS RF Control system through iNELS Multimedia
Insertion of smart boxes to the system enables you to control bus and wireless actuators
through the videozone or via one of the iNELS Home Control application.
Communication between the devices and iMM multimedia server are done through:
- eLAN-RF-003: wired Ethernet access
- eLAN-RF-Wi-003: wired Ethernet access or wireless access using Wi-Fi networks
The device communicates with the actuators in both directions - ie. it is able to send back
information on the status of wireless actuator
The smart boxes are used in iNELS BUS System with iNELS Multimedia, but also can be
used separately in iNELS RF Control system.
They enable to control lights, blinds, heating via:
- iHC-MRF Application for smartphones (Android operating system)
- iHC-TRF Application for tablets (Android operating system)
- Web browser
The device has the fuction of repeater (signal repeater) thus extends the RF signal
Smart boxes are used also in a network, when you have a problem to transfer the wireless
signal between the ceilings of the house (which are mostly from reinforced concrete).
- here we use two WiFi routers or an Ethernet cable connection
Included is an internal antenna, optional external antenna is labeled AN-E
RF ANT.
WiFi ANT.
WIFI STATUS
OASIS & Touch
WiFi
IEEE 802.11
LED indication Ethernet
communication
Compatible
868MHz
EAN code
eLAN-RF-003: 8595188146845
eLAN-RF-Wi-003: 8595188148726
External antenna AN-E: 859415759012
Internal antenna AN-I: 8595188161862
Connector
SMA RF antenna
Red LED RF
STATUS
RESET button
Green POWER LED
indication
power supply
Connector Ethernet
(RJ 45
Yellow USB status LED
USB B
connector
Back panel eLAN-RF-Wi-003
Back panel eLAN-RF-Wi-003
EXTERNAL ANTENNA AN-E
Connection eLAN-RF -003
Connector
WiFi SMA
antenna
Green LED
WiFi STATUS
Connector
SMA antenna
Red LED
RF STATUS
RESET button
Green POWER LED
indication
power supply
Connector
Ethernet (RJ 45)
Yellow USB status LED
Supply
connector
10-27V/
200mA
SELV
USB B
connector
LED indication Ethernet
communication
Front panel eLAN-RF-003
Back panel eLAN-RF-003
Connection eLAN-RF-Wi-003
eLAN-RF-Wi-003
eLAN-RF-003
TECHNICAL PARAMETERS
n
n
n
n
n
n
n
n
n
INTERFACE RF CONTROL
INTERFACE ETHERNET
OTHER DATA
POWER SUPPLY
INTERFACE WIFI
Communication protocol:
Broadcasting frequency
Signal transfer method:
Output for antenna:
Antenna RF:
Indications RF communications:
Range in free space:
ETH operating status indicator:
ETH communication indicator:
Communications interface:
Preset IP address:
Indication:
RESET button:
Power source:
Operating temperature:
Storage temperature:
Protection:
Contamination degree:
Working position:
Installation:
Design:
Dimensions:
Weight:
Supply voltage/current:
Power:
Supply voltage indication:
Frequency range of WiFi
Standard:
WiFi Security:
Certifi cation:
Communication interface:
Výstup pro anténu WiFi:
WiFi antenna output:
Indication of WiFi communication:
Range:
OASIS & RF Touch Compatible
868 MHz
two-way addressed message
SMA connector
1 dB (part of supply)
1 x red RF com. LED
up to 100m
green LED
yellow LED
10/100 Mbps (RJ45)
192.168.1.1
yellow USB status LED
reset defaults
230 VAC / 12 V DC part of supply of device
-20 .. +50 °C
-25 .. +70 °C
IP20
2
any
free
installation box
90 x 52 x 65 mm
136 g
10-27 V DC / 200 mA SELV
adapter with connector Jack Ø 2.1 mm
(part of supply) or connector USB-B
green LED POWER
x
x
x
x
x
x
x
x
x
x
2.405-2.480 Hz
IEEE 802.11 b/g/n
WEP, WPA-PSK, WPA2-PSK
United States (FCC), Canada(IC),
Europe(ETSI), Japon(ARIB)
1 Mb/sec
R-SMA
1 dB (part of supply)
1 x green WiFi status LED
200 m
(pic. 1)
Supply connector
10-27V/ 200mA
SELV