Technical data

56
ETHERNETUSB
RESET
POWER
LEARN
IR
OUT
STATUS
OUT
STATUS
OUT
STATUS
1I
1I R2 IR3
IR
OTHER DATA
OPERATING CONDITIONS
DIMENSIONS AND WEIGHT
OUTPUTS
ETHERNET COMMUNICATION
POWER SUPPLY
IR SENSOR  LEARNING MODE
EAN code
Elan-IR-003: 8595188132831
Example of connection:TECHNICAL PARAMETERS
Infrared sensor for learning IR codes
20 - 455 kHz
till 1m
3x IR transmitter
3x 3.5 Jack connector, cable length 3 m
3x LED green status IR1-IR3
Up to 1m from the device
Green LED
Yellow LED
10/100 Mbps (RJ45)
192.168.1.1
10-27 V DC / 200 mA ( safe low voltage )
Jack connector Ø 2.1 mm
Green LED
USB-B connector
Yellow USB LED status
settings to their default values
230 VAC / 12 V DC supplied with the data logger
-20 .. +55 °C
-25 .. +70 °C
IP 30
2
arbitrary
free
design box
90 x 52 x 65 mm
136 g
Senzor IR:
The carrier IR frequency:
Learning distance:
Output:
Connection:
Output indication:
Range:
Indication of ETH operating status:
Indications of ETH communication:
communication Interface:
Default IP address:
Voltage supply / jm. current:
Connection:
Voltage supply indication:
Other possibilities of wiring:
Indication:
Reset button:
Power Supply:
Working temperature:
Storage temperature:
Degree of protection:
Degree of pollution:
Operating position:
Installation:
Design:
Dimensions:
Weight:
The smart box can be used in two diff erent ways such as:
- a component of iNELS BUS System - by IR signal controls devices of third parties
- indendent device or „The fear of IR controllers“ = consolidates all controllers
under one.
Elan-IR-003 is a converter from Ethernet network commands to IR code
The smart box can control devices which are controled by IR remote controllers,
e.g. TV, video, satellite, DVD, amplifi er, stereo system, air condition, fans etc.
In case of integration a smart box to iNELS BUS System there is possibility to
control all devices mentioned above through:
- an apllication (Smart phone and tablets with Android operating system, iPhone
and iPad) designed for entire electro-installation and multimedia
- screen TV using Videozone
If the smart box is used as independent device, there is a possibility to control up to
3 independent devices through the iHC-MAIR application (for Smartphones with
Android operating system) or the iHC-MIIR (for iPHONE). There is no need to place
devices in visible distance.
The ability to program up to 100 IR codes
Supporting IR codes for the frequency of 20-455 kHz
Green LED status
Receiver of
IR signals
Output for
IR transmitter
The front panel of eLAN-IR
The back panel of eLAN-IR
Reset button
Green POWER LED
Power Indicator
Connector Ethernet
(RJ 45)
LED Ethernet Indication communication
Power Connector
10-27V/
200mA
USB B
Connector
LED Ethernet Indication
communication
The smart box for controlling your Audio/Video equipments eLAN-IR-003
n
n
n
n
n
n
n