Technical data

44
WSB3-20 WSB3-40
+
-
CIB
CIB
Wall switch button
WSB3
CIB+
CIB
I
CIB+
CIB
I
AIN1/DIN1
AIN1/DIN1
AIN2/DIN2
AIN2/DIN2
EAN code
WSB3-20 8595188132343
EAN code
WSB3-40 8595188132336
WSB3-20 WSB3-40
YES, built-in temperature sensor, NTC
0.. +55°C ; 0.3°C from the range
2 4
2x AIN/DIN
by setting bit 10
Yes, the connection between
AIN1/DIN1 and AIN2/DIN2
TC/TZ
-20°C až +100°C
+0,5°C from range
two-colored LED (red, green)
1 2
CIB
27 V DC/25 mA, from CIB BUS
0.5 - 1 mm
2
-20 .. +55 °C
-30 .. +70 °C
IP 20
II.
2
any
into installation box
85.6 x 85.6 x 30 mm
94 x 94 x 30 mm
70 g (without frame)
Temperature measuring:
Scope and accuracy of temp. measurement:
Number of control buttons:
Inputs:
Resolution:
Ext. temperature sensor:
Type ext. sensor:
Temperature measurement range:
Temperature measurement accuracy:
Indication:
Number of outputs:
Installation BUS:
Supply voltage/rated current:
Terminals:
Operation temperature:
Storing temperature:
Protection degree:
Overvoltage category:
Pollution degree:
Operation position:
Installation:
Dimensions (plastic):
Dimensions (metal, glass, wood, granite)
Weight:
OUTPUTS
COMMUNICATION
POWER SUPPLY
CONNECTION
OPERATING CONDITIONS
DIMENSIONS AND WEIGHT
INPUTS
TECHNICAL PARAMETERS
WSB3 in design Elegant and LOGUS
90
, designed for mounting into wiring box
Example of connection
Wall group controllers with low-upstroke control WSB3
n
n
n
n
n
n
n
n
n
n
n
Wall controllers with low-upstroke control (line) WSB2 are main and most frequently
used units (sensors) in iNELS system
Built-in micro-buttons with low upstroke off er elegant and easy control
Two-colored indication LED, located in each position of controller, can signal status
of controlled appliance, and also status of any sensor or actuator in the system
Controllers are designed as two-channel (WSB2-20), four-channel (WSB2-40) and
eight-channel (WSB2-80)
All versions are in the same dimension as a basic modular wall-switch (89x84 mm),
in design Elegant and Logus90 (except WSB-80), and can be combined into multi-
frames with other devices of this line
Each controller is equipped with temperature sensor
They are also equipped with two analog digital inputs (AIN/DIN) which enable to
connect the external temperature sensors TC/TZ
Biggest advantage compare to standard wall-switches/buttons is space saving and
comfortable control. For example instead of a long line of 8 standard wall-switches,
you can use only one wall group controller WSB2-80
Each channel (button) can control any actuator (appliance) in the system. It is also
possible to program various functions or fuction macro (set of functions) to each
button. Allowing you to control several appliances with one button simultaneously
Each button (fold) can have diff erent functional modes beside lightning control:
a)
b)
c)
d)
e)
Classic wall-switch:
- upper button ON, bottom button OFF
Button controller (impulse relay):
- fi rst press ON, second press OFF
Dimmer:
- short press – ON/OFF,
Time switch:
- ON after press, automatically OFF after set time
Setting light scenes – for example: for watching TV:
- shutters down
- TV ON
- main light 30% intensity
- wall-lamps 50% intensity