Technical data

41
IN1
IN4
IN7
IN10
IN3
IN6
IN9
IN12
IN2
IN5
IN8
IN11
EST-3/B/RGB
EST-3/B, EST-3/B/RGB EST-3/B, EST-3/B/RGB
THE SCREENSHOTS
Device
Information
Circuit
temperature
adjustment
Decrease
Illumination
in color based
on RGB
Increase
brightness
Output ON/OFF
button
Illumination in
white
Settings
Button for moving between screens
EST-3=> settings menu=>design selection=>2x2 - input IN1- IN4
EST-3=> settings menu=>design selection=>2x3 - input IN1- IN6
EST-3=> settings menu=>design selection=>3x3 - input IN1- IN9
EST-3=> settings menu=>design selection=>3x4 - input IN1- IN12
Legend:
DISPLAY BUTTONS
Programming the iNELS system functions for individual buttons on the EST-2 device screen is performed the same as programming other digital inputs, events in the IM2-140M
unit. On the given digital inputs, it is only possible to use parameters A and D. It is not possible on inputs to use and distinguish parameter I - negated output, and parameter B –
balanced input, as well as the double balanced input parameter. The buttons are identical to the binary inputs of the IM2-140M unit (see confi g. image). Buttons can be confi gured
the same as the WSB wall controller, both for short and long press (>1.5s).
Four colored LED indicators are connected to digital outputs, and are found in the upper left corner of the screen. Each of the four colored LEDs is separately controllable and
programmable. The green and blue LEDs are connected to outputs RE1, RE2 of the KEY2-01 device in the device manager. The yellow and red LEDs are connected to outputs
HAND, and MAN of the IDRT2 1 device in the device manager.
HEATING CONTROL SCREEN
On the heating control screen of the EST-3, it is possible to adjust the temperature of the selected heating circuit in a range of +/- 5°C., or according to the menu settings it is
possible to set absolute temperature required for a room or a heating circuit. These buttons served for temperature correction in heating circuit are connected to analog input of
device of temperature correction. Each colored LED indicator can be controlled and programmed individually.
RGB LAMP AND LIGHT SOURCE CONTROL SCREEN
The EST-3/B/RGB screen contains basic regulation and CONTROL FEATURES and buttons for controlling RGB light sources. The function of screen control of RGB is set up as follows:
each color component R, G and B is banded and simulates the signal level on analog inputs R,G,B, fi nal brightness of a lamp is simulated on analog input 0 - 100 %.
The RGB control display is comprised of several elements and buttons.
- A long press (touch) on the ON/OFF controls the central setting of RGB components and lamp brightness - on/off
- Buttons
in the upper half of the screen are for setting the lamp brightness from 0-100% in 5% increments (see adjustable brightness indicator in %)
- Buttons
in the lower half of the screen are for setting the color comfort and accelerated lamp RGB control. The buttons have a lock function. When pressing
„white illumination“ button, the analog inputs are automatically set to the maximum value of individual color components, which appears as a resulting white light at the RGB
light source output when these components are mixed. Then simply adjust the brightness intensity at the output. When pressing (touching) the button
„RGB-based color
illumination“, the „white illumination“ , button automatically unlocks, and the „RGB-based color illumination“ settings button locks. Now the values of analog inputs of individual
RGB color components are preset according to the set cursor in the color wheel of the RGB scale on the EST-3.
Info
gives information on the device and fi rmware version. Clicking the icon brings you to the settings menu, used to edit the EST-3. The icon returns to the buttons panel.
The system time is displayed in the upper right corner of the screen. The displayed system time is connected to the KEY2-01 unit in the device manager.
In the case of request for changing the original screen (panel) buttons, it is always necessary to perform RESET device before confi guration of icons (buttons).
All inputs and outputs on the EST-2 unit can be freely programmed and parameterized using the IDM program.
n
n
n
n
n
n
n
n
n