Technical data

34
IM3-140M
+
-
CIB
CIB
+12 V
GND
IM3-140M 8595188132459
It serves for connection of up to 14 devices with potential-less contacts (switches,
buttons, sensors, fi re and gas detectors etc. ).
Inputs IN1 - IN7 can be used as balanced.
Generates supply voltage of 12V DC/150mA for supplying sensors, so it is possible
to connect PIR sensors, fi re and gas detectors etc.
Contacts external devices connected to the INPUTS can be NO or NC - Input
parameters are confi gured in software IDM.
IM3-140M in 3-module version is designed for mounting into switchboard, on DIN
rail EN60715.
14x NO or NC against GND (-)
IN1 - IN7 -are balanced inputs
12 V DC/150 mA
CIB
yellow LED
27 V DC/25 mA, from CIB BUS
100 mA
green LED Un
max. 2.5 mm
2
/1.5 mm
2
with sleeve
-20 .. +55 °C
-30 .. +70 °C
IP 20 device, IP 40 mounting in the switchboard
II.
2
any
into a switchboard rail to DIN EN 60715
3-MODULE
90 x 52 x 65 mm
102 g
Input:
Output (POWER SUPPLY 12V for sensors):
Installation BUS:
Data transfer indication:
Supply voltage/rated current:
Rated current for full
load on output 12 V DC:
Supply voltage indication:
Terminal:
Operating temperature:
Storing temperature:
Protection degree:
Overvoltage category:
Pollution degree:
Operating position:
Installation:
Design:
Dimensions:
Weight:
Example of connection
CONNECTION
OPERATING CONDITIONS
DIMENSIONS AND WEIGHT
OUTPUTS
COMMUNICATION
POWER SUPPLY
INPUTS
TECHNICAL PARAMETERS
EAN code
Binary input unit IM3-140M
n
n
n
n
n
for POWER SUPPLY
external alarm
detectors
12 V DC / 150 mA