Technical data
31
R
G
B
12V DC
R B
G M
V V
V M
S1 S2
S3 M
R
G
B
12V DC
V
V
V
12V DC
S1
S2
S3
12V DC
R
B
RB
S1
S2
S1
S2
S3
RF KEY
RF KEY
RF KEY
EST - 3
RF RGB
RF COLOR
RF SINGLE
TERM 0-10V
TERM 1-10V
RF Touch
RF RGB
RF COLOR
RF RGB mode for controlling RGB LED strips.
In the RF RGB programming mode, colors are automatically assigned
to individual transmitter buttons.
Note: It is only possible to use this function for RFWB-40, RF KEY and
RFIM-40
LEGEND
Buttons:
R - red
G - green
B - blue
M - master setting of overall scene brightness
Mode RF COLOR for controlling RGB LED strips, where it is possible
to choose the color for an individual transmitter button. The de-
vice is brought into programming mode when the strip changes
color. By pressing transmitter, the color is automatically set under
the given button.
Note: It is only possible to use this function for RFWB-40, RF KEY
and RFIM-40
LEGEND
Buttons:
V - free selection of color
V - free selection of color
V - free selection of color
M - master setting of overall scene brightness
Mode RF SINGLE.
It works in a mode, where it acts like 3 separate dimmers for RF
SINGLE 12-24 V, meaning it dims 3 blue strips. Each channel can
be programmed independent of each other and has its own
address.
LEGEND
Buttons:
S1- single color
S2 - single color
S3 - single color
M - master setting of overall scene brightness
RF SINGLE
MODES TERM 0 -10V AND TERM 1-10V.
Inputs 0 - 10V and 1 -10V serves for controlling iNELS with the
help of DAC32-4M or DAC3-04B. So it‘s possible to combine and
control LED strips via iNELS.
TERM 0-10V aTERM 1-10V
Obr.1
pic.2
pic.3
pic.4.