Technical data

29
7
6
5
4
3
2
1
4
3
2
1
-
+
L
N
-
+
L
N
+
-
CIB
CIB
L
N
PE
AC 230V
220 V - 240 V
220 V - 240 V
DC 1..10 V
DC 1..10 V
Example of connection:
Number of control buttons:
Output:
Switching voltage:
Switching capacity:
Peak current:
Insulation voltage between
outputs and internal circuits:
Insulation voltage between
relay outputs RE1 and RE2:
Minimal switched current:
Frequency of switching/no load:
Frequency of switching/rat. load:
Mechanical life:
Electrical life AC1:
Output indication:
Installation BUS:
Supply voltage/rated current:
Status indication unit:
Terminal:
Operating temperature:
Storing temperature:
Protection degree:
Purpose of control devices:
The design of control device:
Characteristics machine. action:
Category of resistance to heat and fi re:
Category (immunity):
Rated impulse voltage:
Overvoltage category:
Pollution degree:
Operating position:
Installation:
Design:
2 buttons on the front panel
2x 1-10V/10 mA
2x changeover 16 A/AC1
250 V AC1, 24 V DC
4000 VA/AC1, 384 W/DC
30 A/<3s
3.75 kV, SELV by EN 60950
1000 V AC
100 mA
1200 min
-1
6 min
-1
3 x 10
7
0.7 x 10
5
2x yellow LED
CIB
27 V DC/60 mA, from CIB BUS
green LED RUN
max. 2.5 mm
2
/1.5 mm
2
with sleeve
-20 .. +55 °C
-30 .. +70 °C
IP 20 device, IP 40 mounting in the switchboard
operative control devices
independent control device
1.B.E
FR-0
class 2
2.5 kV
II.
2
any
switchboard on DIN rail EN 60715
3-MODULE
Designed for controlling dimming light ballasts with signal 1-10V.
During analog voltage output 1-10V control, relay contact automatically switches
power supply to light ballast (0%=relay OFF, 1-100%=relay ON)
LBC3-02M contains 2 independent analog voltage outputs 10V and their dependents
2 relays with potential-free contact.
Maximum contact load 16 A/4000 VA/AC1.
Each of two channel is separately controllable and addressable.
LED‘s on front panel signals status of each channel.
With control buttons on the front panel, is possible to change status of each channel
separately.
LBC3-02M in 3-MODULE version is designed for mounting into a switchboard/ DIN
rail EN60715.
INPUTS
OUTPUTS
TECHNICAL PARAMETERS
Dimming 2-channel actuator for fl uorescent lamps LBC3-02M
n
n
n
n
n
n
n
n
DIMENSIONS AND WEIGHT
Dimensions: 90 x 52 x 65 mm
Weight: 129 g
light source
corresponding to
fl uorescent
předřadník z řady DIML
input
input
CONNECTION
OPERATING CONDITIONS
POWER SUPPLY
COMMUNICATION
LBC3-02M 8595188132688
EAN code
DIML light ballast