Technical data

24
+
-
CIB
CIB
AC 230V
L
N
2
6
28
68
26
66
3
38
36
4
48
46
1
5
18
58
16
COM 1
COM 2
56
SA3-06M : 8595188132879
Switching actuator 6-channel SA3-06M
Output:
Switching voltage:
Switching output:
Surge current:
Insulation voltage between
outputs and internal circuits:
Insulation voltage between individual
relay outputs PUTS RE1-RE4; RE5-RE6:
Min. switched current:
Switching frequency /no load:
Switching frequency/rated load:
Mechanical life:
Electrical life AC1:
Output indication:
Installation BUS:
Supply voltage/rated current:
Status indication unit:
Terminal:
Operation temperature:
Storing temperature:
Protection degree:
Control device purpose:
Control device constuction:
Automatic operation characteristic:
Heat and fi re resistance category:
Anti-stroke category (immunity):
Rated impulse voltage:
Overvoltage category:
Pollution degree:
Operation position:
Installation:
Design:
Dimensions:
Weight:
It is designed for switching of various appliances and loads with potentialless contact
SA3-06M contains 6 independent relays with changeover potentialless contacts
Maximum load per contact is 8 A/2000 VA/AC1
Each of four output contacts are individually controllable and addressable
LED‘s on front panel signal status of each output
Contact status of each relay can be changed separately and manually by control
buttons on a front panel
SA3 is normally supplied in the option AgSnO
2
contact material, it can be
supplied with contact AgNi by request
SA3-06M in 3-MODULE version is designed for mounting into a switchboard/DIN rail
DIMENSIONS AND WEIGHT
Example of connection
CONNECTION
OPERATING CONDITIONS
OUTPUTS
COMMUNICATION
POWER SUPPLY
EAN code
TECHNICAL PARAMETERS
n
n
n
n
n
n
n
n
6 x NO 8 A/AC1
250 V AC1, 24 V DC
2000 VA/AC1, 192 W/DC
20 A/<3s
3.75 kV, SELV by EN 60950
1000 V AC
10 mA/ 10V
300 min
-1
15 min
-1
1 x 10
7
1 x 10
5
6x yellow LED
CIB
27 V DC/100 mA, from CIB BUS
green LED RUN
max. 2.5 mm
2
/1.5 mm
2
with sleeve
-20 .. +55 °C
-30 .. +70 °C
IP 20 device, IP 40 mounting in the switchboard
operative control device
individual control device
1.B.E
FR-0
class 2
2.5 kV
II.
2
any
switchboard on DIN rail EN 60715
3-MODULE
90 x 52 x 65 mm
256 g