Technical data

10
Switching actuators
SA3-01B
1x switch contacts 16 A,
1x thermo input,
mounting into the
installation box
SA3-02B
2x changeover contacts 8 A,
1x thermo input,
mounting into the
installation box
SA3-02M
2x changeover contacts 16
A, LED indication for relay
status, manual control,
1-MODULE
SA3-04M
4x changeover contacts 16
A, LED indication for relay
status, manual control,
3-MODULE
SA3-012M
12x switch contacts 8 A,
LED indication for relay status,
manual control,
6-MODULE
SA3-06M
6x changeover contacts 8 A,
LED indication for relay
status, manual control,
3-MODULE
CU3-01M
Basic element of the system, 2x CIB, OLED display, Ethernet 10/100 Mbps,
1x RS232, 2x PSM, 4 universal inputs, 6-MODULE
GSM3-01
GSM gateway for iNELS communication system
with GSM mobile phones, RS232, 3-MODULE
BPS3-01M, BPS3-02M
It is used for impedance segregation of
bus from the power supply, 1-MODULE
MI3-02M
Allows you to expand the system with two
CIB (2 x 32 units), 1-MODULE
PS3-100/iNELS
Power supply 100W, supply voltage AC 85-253 V AC/50-60 Hz,
output voltage DC / max. current: 27.6 V/3.6 A and 12.2 V/0.35 A, 6-MODULE
Shutter actuator Dimming actuators
JA3-02B/DC
Actuators for control and
management of blinds, shutters,
awnings, mounting into the
installation box
LBC3-02M
Control unit for electric ballast,
2x changeover contacts 16A,
2x analog signal 1-10 V,
LED indication for relay status,
3-MODULE
DA3-22M
Unit for ESL dimming,
LED and RLC load, 2 x 400 VA,
2 control inputs, 1x thermal
input, 3-MODULE
Overview of system units
System units