ELKHART BRASS MFG. CO., INC. 1302 WEST BEARDSLEY AVENUE P.O. BOX 1127 ELKHART IN 46515 (574) 295-8330 FAX (574) 293-9914 Installation Instructions Manual Foam Tubes Model 251-6, 251-6 CJ, 252-8, 253-9 98435000 Rev.
Table of Contents I. PRODUCT SAFETY ................................................................................................................... 1 II. INSTALLATION INSTRUCTIONS .......................................................................................... 2 1. 2. 3. 4. 5. 251-6 FOAM TUBE ...................................................................................................................... 2 251-6 CJ FOAM TUBE ............................................................
I. PRODUCT SAFETY Important: Before installing and operating this equipment, read & study this manual thoroughly. Proper installation is essential to safe operation. In addition, the following points should be adhered to in order to ensure the safety of equipment and personnel: 1. All personnel who may be expected to use this equipment must be thoroughly trained in its safe and proper use. 2.
II. INSTALLATION INSTRUCTIONS 1. 251-6 Foam Tube To attach the foam tube to the nozzle first lift up on the lever handle to open the jaw clamp (see Figure 1), then carefully tilt the nozzle bumper into the half round portion of foam tube base clearing the jaw clamp. Next press down firmly on the lever handle to fully clamp nozzle into place (see Figure 2).
2. 251-6 CJ Foam Tube To attach the foam tube to the nozzle first lift up on the lever handle to open the jaw clamp (see Figure 3 ), then carefully tilt the nozzle bumper into the half round portion of foam tube base clearing the jaw clamp. Next press down firmly on the lever handle to fully clamp nozzle into place (see Figure 4 ).
3. 252-8 Foam Tube To attach the foam tube to the nozzle first lift up on lever handle to open the jaw clamp (see Figure 5 ), then carefully tilt the nozzle bumper into the half round portion of foam tube base clearing the jaw clamp. Next*, press down firmly on the lever handle to fully clamp nozzle into place (see Figure 6 ).
Figure 6 4. 253-9 Foam Tube To attach the foam tube to the nozzle first lift up on lever handle to open the jaw clamp (see Figure 7), then carefully tilt the nozzle bumper into the half round portion of foam tube base clearing the jaw clamp. Next press down firmly on the lever handle to fully clamp nozzle into place (see Figure 8).
5. 254-6 Foam Tube To attach the foam tube to the nozzle first lift up on the lever handle to open the jaw clamp (see Figure 9), then carefully tilt the nozzle bumper into the half round portion of foam tube base clearing the jaw clamp. Next press down firmly on the lever handle to fully clamp nozzle into place (see Figure 10).
Elkhart Brass Mfg. Co., Inc. Mailing Address: P.O. Box 1127 Elkhart, IN 46515 USA Shipping Address: 1302 W. Beardsley Ave. Elkhart, IN 46514 USA Tel. 1-574-295-8330 1-800-346-0250 Fax 1-574-293-9914 e-mail: info@elkhartbrass.com www.elkhartbrass.com 98435000 Rev.
