Installation Sheet

Place faucet in position on sink. From
under sink, threads mounting nuts onto
faucet. Tighten mounting nuts. Hand
tighten only.
WARNING: Please carefully read and properly follow the instructions for installation found in this manual.
STEPS:
Important: After installation is
completed, remove aerator. Turn on
hot and cold water supplies. Turn
handle to full open position for one
minute. Check for leaks. Replace
aerator.
Make connections to water lines.
Use 1/2" I.P.S. faucet connections (1)
or use supplied coupling nuts (3)
with 3/8" O.D.ball-nose riser(2).
Use wrenches to tighten connections.
Do not overtighten.
1
2
3
(A)
(B)
CARTRIDGE REPLACEMENT
Loosen cartridge nut (1) by turning it
counter-clockwise and lift out the cartridge (2) and
disc & spring (3). Insert new cartridge and disc &
spring. Reinstall the handle.
Shut off water supply. With valves in "closed" position,
remove index (1) from handle (3). Loosen the screw (2)
and remove handle (3).
1
2
3
1
2
3