Installation Sheet

[phone] 13 Elkay Manufacturing Company
Installation Manual (1000005449 Rev. A) In-Wall Filtered Water Dispenser
NOTICE
For the following steps, it is
recommended to use a heat gun
when manipulating the exible drain hose. It is
benecial to conservatively soften the material
before trying to make connections.
6. Attach one end of the 3/4" exible drain hose to
the 3/4" barbed drain adapter connection using the
supplied hose clamp. The supplied exible drain is
13" long. If a longer drain hose is required, it must be
installer-supplied.
7. Place the drain basin back into the water dispenser
and reinstall the two screws.
8. If the lter box is used, route the drain hose through
the lter box. Attach the other end to the p-trap drain
adapter using a hose clamp. The drain adapter is
designed to be glued into a 1-1/4" PVC pipe.
Shown with optional
lter box.
9. Install the lter by twisting it into the lter head.
10. Connect the drain adapter into the waste drain pipe.
If the p-trap is located inside a sealed walled, it must
have permanently-glued joints. If the p-trap is in an
accessible location, a standard non-glued p-trap is
acceptable.
Note: Whichever installation method is used: it must
meet local standards and building codes.
11. Install the metal cover. Do not install the drip tray if
the unit is plumbed into the local waste line.