Specification Sheet

CAPACITIES CHART
Model Voltage / Hertz
Chilling**
Capacity
F.L.
Amps
Rated
Watts
Approx.
Ship
Wt.
ADA
Compliant
UL399 and
CAN/CSA 22.2
No. 120
Certied
NSF/ANSI
61 and 372
Certied
GreenSpec
®
Listed
EZWS(M)8PK 115V / 60Hz 8.0 GPH 5.0 370 77 lbs.
• • • •
EZWSM82PK 220V / 50Hz 6.7 GPH 2.0 370 77 lbs.
• • • •
EZWSM83PK 220V / 60Hz 8.0 GPH 2.2 370 77 lbs.
• • • •
EZWSMDPK 115V / 60Hz - 1.0 15 30 lbs.
• • • •
EZWSMDJOPK 220V / 50-60Hz - 1.0 15 30 lbs.
• • • •
**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.
© 2016 Elkay
SPEC14-63 (05/2016)
PRODUCT SPECIFICATION
In-wall recessed bottle lling station for use with EDFPBM SwirlFlo
®
fountains. Models EZWS(M)8(2-3)PK shall deliver 8 GPH of 50°F drinking
water at 90°F ambient and 80°F inlet water. Models EZWSMD(JO)PK
shall deliver non-chilled drinking water. Units shall be stainless steel
construction with plastic ABS alcove. Sensor-activation with an auto
20-second shut-off timer. Shall include Green Ticker™ displaying count of
plastic bottles saved from waste. Bottle ller shall provide 1.1-1.5 gpm ow
rate with laminar ow to minimize splashing. Shall include integrated silver
ion anti-microbial protection in key areas. Unit shall meet ADA guidelines.
Unit shall be leadfree design which is certied to NSF/ANSI 61 and 372 and
meets Federal and State low-lead requirements. Unit shall be certied to
UL399 and CAN/CSA 22.2 No. 120.
STANDARD FEATURES
• Special panel height designed to pair with non-refrigerated EDFPBM
SwirlFlo
®
models
• Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)
• Integrated Silver Ion Anti-Microbial Protection in key areas
• Quick Fill Rate: 1.1 gpm (EZWS(M)8PK); 1.5 gpm (EZWSMD(JO)PK)
• Laminar Flow provides minimal splash
• Real Drain System eliminates standing water
• Visual User Interface display includes:
• Innovative Green Ticker™ counts bottles saved from waste
• Includes lower hinged panel for easy access and servicing
COOLING SYSTEM (Models EZWS(M)8(2-3)PK)
• Compressor: hermetically-sealed, reciprocating type, single phase.
Sealed-in lifetime lubrication.
• Condenser: Fan cooled. Fan motor is permanently lubricated.
• Cooling Unit: Combination tube-tank type. Continuous copper tubing
with stainless steel tank. Fully insulated with EPS foam which meets
UL requirements for self-extinguishing material.
• Refrigerant Control: Refrigerant R134a is controlled by accurately
calibrated capillary tube.
• Temperature Control: Enclosed adjustable thermostat is factory preset.
Requires no adjustment other than for altitude requirements, Easily
accessible by removing lower grille panel.
Warranty: 5 year limited warranty on the unit’s refrigeration system.
Electrical components and water system are warranted for 12 months
from date of installation or 18 months from factory shipment, whichever
date falls rst.
This specication describes an Elkay product with design, quality and functional
benets to the user. When making a comparison of other producer’s offerings, be
certain these features are not overlooked.
RATED FOR INDOOR USE ONLY
CONSTRUCTION
• Stainless steel bottle ller construction with ABS plastic
alcove
• Includes stainless steel lower panel. EZWS(M)8PK models
have louvered ventilating grille; EZWS(M)DPK models
have solid panel
• Models EZWSM8PK, EZWSM82PK, EZWSM83PK,
EZWSMDPK, EZWSMDJOPK include MFWS100 wall
mounting frame constructed of galvanized steel.
• Model EZWS8PK, mounting frame MFWS100 can be
ordered separately for pre-install.
SPECIFICATIONS
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
elkay.com
In keeping with our policy of continuing product improvement,
Elkay reserves the right to change specication without notice.
Please visit elkay.com for the most current version.
Models
EZWS8PK
EZWSM8PK
EZWSM82PK
EZWSM83PK
Models
EZWSMDPK
EZWSMDJOPK
EZH2O
®
Bottle Filling Station
In-Wall Recessed
Models EZWS8PK, EZWSM8(2-3)PK and
EZWSMD(JO)PK
Models EZWSM8PK, EZWSM82PK,
EZWSM83PK, EZWSMDPK, EZWSMDJOPK –
Mounting frame MFWS100 is included.
Model EZWS8PK – Used when mounting frame
is pre-ordered for early installation