Specification Sheet

CAPACITIES CHART
Model Voltage / Hertz
Chilling**
Capacity
F.L.
Amps
Rated
Watts
Approx.
Ship
Wt.
ADA
Compliant
UL399 and
CAN/CSA 22.2
No. 120
Certied
NSF/ANSI
61 and 372
Certied
GreenSpec
®
Listed
EZWS(M)8K 115V / 60Hz 8.0 GPH 5.0 370 77 lbs. • • • •
EZWS(M)82K 220V / 50Hz 6.7 GPH 2.5 370 77 lbs. • • • •
EZWS(M)83K 220V / 60Hz 8.0 GPH 2.5 370 77 lbs. • • • •
EZWS(M)DK 115V / 60Hz - 1.0 15 30 lbs. • • • •
EZWS(M)DJOK 220V / 50-60Hz - 0.5 15 30 lbs. • • • •
**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.
© 2015 Elkay
SPEC14-62 (06/2015)
PRODUCT SPECIFICATION
In-wall recessed bottle lling station. EZWS(M)8K shall deliver 8 GPH of
50°F drinking water at 90°F ambient and 80°F inlet water. EZWS(M)DK
shall deliver non-chilled drinking water. Units shall be stainless steel construction
with plastic ABS alcove. Sensor-activation with an auto 20-second shut-off
timer. Shall include Green Ticker™ displaying count of plastic bottles saved
from waste. Bottle ller shall provide 1.1-1.5 gpm ow rate with laminar
ow to minimize splashing. Shall include integrated silver ion anti-microbial
protection in key areas. Unit shall meet ADA guidelines. Unit shall be
lead-free design which is certied to NSF/ANSI 61 and 372 and meets
Federal and State low-lead requirements. Unit shall be certied to UL399
and CAN/CSA 22.2 No. 120.
STANDARD FEATURES
• Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)
• Integrated Silver Ion Anti-Microbial Protection in key areas
• Quick Fill Rate: 1.1 gpm (EZWS(M)8); 1.5 gpm (EZWS(M)D)
• Laminar Flow provides minimal splash
• Real Drain System eliminates standing water
• Visual User Interface display includes:
• Innovative Green Ticker™ counts bottles saved from waste
• Includes lower hinged panel for easy access and servicing
COOLING SYSTEM (Model EZWS(M)8)
• Compressor: hermetically-sealed, reciprocating type, single phase.
Sealed-in lifetime lubrication.
• Condenser: Fan cooled. Fan motor is permanently lubricated.
• Cooling Unit: Combination tube-tank type. Continuous copper tubing
with stainless steel tank. Fully insulated with EPS foam which meets
UL requirements for self-extinguishing material.
• Refrigerant Control: Refrigerant R134a is controlled by accurately
calibrated capillary tube.
• Temperature Control: Enclosed adjustable thermostat is factory preset.
Requires no adjustment other than for altitude requirements, Easily
accessible by removing lower grille panel.
This specication describes an Elkay product with design, quality and functional
benets to the user. When making a comparison of other producer’s offerings,
be certain these features are not overlooked.
RATED FOR INDOOR USE ONLY
CONSTRUCTION
• Stainless steel bottle ller construction with ABS plastic
alcove
• Includes stainless steel lower panel. EZWS(M)8 models
have louvered ventilating grille; EZWS(M)D models have
solid panel.
• Furnished with MFWS100 wall mounting box constructed
of galvanized steel. Mounting can be ordered separately
for pre-install.
Warranty: 5 year limited warranty on the unit’s refrigeration
system. Electrical components and water system are
warranted for 12 months from date of installation or 18
months from factory shipment, whichever date falls rst.
SPECIFICATIONS
EZH2O
®
Bottle Filling Station
In-Wall Recessed
Model EZWS(M)8K & EZWS(M)DK
Model
EZWS(M)8K
Model
EZWS(M)DK
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
elkay.com
In keeping with our policy of continuing product improvement,
Elkay reserves the right to change specication without notice.
Please visit elkay.com for the most current version.