Specification Sheet

17 7/8"
455mm
22 15/16"
583mm
38 1/2"
978mm
9 13/16"
249mm
30 1/8"
765mm
5/8"
16mm
4 1/2"
114mm
28 3/4"
730mm
27"
686mm
ADA
REQUIREMENT
33 15/16"
862mm
1 9/16"
40mm
18 3/8"
467mm
18 13/16"
477mm
A
23 5/16"
592mm
ACTIVATION
SENSOR
EZH2O
®
In Wall Bottle Filling Station
Retro-t Model for
SwirlFlo
®
Refrigerated Fountain
Model EZWS-ERPB8-RF
ROUGH-IN
2222 Camden Court
Oak Brook, IL 60523
elkay.com
2014 Elkay
SPEC00056 (Rev 09/2014)
Printed in U.S.A.
©2014 Elkay
Job Name: ____________________________________
Date: ________________________ Qty. ____________
Contact Info (Name, Phone, Email): ________________
_____________________________________________
_____________________________________________
Approval: _____________________________________
IMPORTANT!
EZWS-ERPB8-RF Retro-t is designed to t on an existing SwirlFlo
®
refriger-
ated style fountain which is properly installed per the Spec Sheet rough-in
information.
*Rated for indoor use only
INSTALLATION STEPS
BOTTLE FILLER / FOUNTAIN INSTALLATION AFTER RETRO-FIT CONVERSION
Disassemble current Bi-Level Refrigerated
fountain installation
Remove left hand mounting frame, replace
with new open frame (included)
Reassemble installation with new upper panel / Bottle Filler as-
sembly, original fountain, original lower mounting frame, chiller
shelf, chiller unit and new lower panel assembly
Typical current installation with fountains
and panels removed
ELECTRICAL
EZWS-ERPB8-RF equipped with electrical cord and three-prong molded rubber
plug for use with 15-amp minimum receptacle. Rated at 115V/60Hz, single phase.
FINISHED FLOOR