Specification Sheet

PRODUCT SPECIFICATION
In-wall EZWS-ERFP8-RF Retro-t system will update existing
refrigerated Bi-Level Soft Sides
®
installations with an integrated
Bottle Filler system. Units shall be stainless steel construction
with plastic ABS alcove. Sensor activation with an auto 20-second
shut-off timer. Shall include GreenTicker™ displaying count of
plastic bottles saved from waste. Bottle ller shall provide 1.1 gpm
ow rate with laminar ow to minimize splashing. Shall include
integrated silver ion anti-microbial protection in key areas. Bottle
ller meets ADA guidelines for reach range; fountain meets ADA
guidelines for wheelchair access. Unit shall be lead-free design
which is certied to NSF/ANSI 61 and 372 and meets Federal and
State low-lead requirements. Unit shall be certied to UL399 and
CAN/CSA 22.2 No. 120.
STANDARD FEATURES
Bottle Filler
• No-touch, sensor-activated operation.
• Auto 20-second shut-off.
• Integrated Silver Ion Anti-microbial Protection in key areas.
• Quick Fill Rate: 1.1 gpm.
• Laminar Flow provides minimal splash.
• Real Drain System eliminates standing water.
• Visual User Interface display includes:
• Innovative Green Ticker™ counts bottles saved from waste.
FOUNTAINS / COOLING SYSTEM
One fountain, one mounting frame (for lower fountain installation)
and the cooling system are reused from the current existing
installation.
CAPACITIES CHART
Model
Voltage /
Hertz
Chilling
Capacity
F.L.
Amps
Rated
Watts
Approx.
Ship
Weight.
EZWS-ERFP8-RF
115V /
60Hz
Based on
Existing
Cooler
Rating
1.0 15 50
RATED FOR INDOOR USE ONLY
2222 Camden Court
OakBrook, IL 60523
630-572-3192
2013 Elkay
SPEC00058 (Rev 09/2014)
In keeping with our policy of continuing product
improvement, Elkay reserves the right to change
specication without notice. Please visit elkayusa.com
CONSTRUCTION
• Stainless steel bottle ller construction with ABS plastic alcove.
• Includes ventilating louvered grille with fountain.
• Furnished with open wall frame mounting box constructed of
galvanized steel.
Each EZWS-ERFP8-RF is shipped in one carton containing:
• Upper panel with installed bottle ller
• Lower panel with ventilation louvers
• Mounting frame for bottle ller
• Misc. hardware
Warranty: Electrical components and water system are warranted
for 12 months from date of installation or 18 months from factory
shipment, whichever date falls rst.
SPECIFICATIONS
This specication describes an Elkay product with design, quality
and functional benets to the user. When making a comparison of
other producer’s offerings, be certain these features are not over-
looked.
EZH2O
®
In Wall Bottle Filling Station
Retro-t Model for
Soft Sides
®
Refrigerated Fountain
Model EZWS-ERFP8-RF
CERTIFICATIONS / STANDARDS
• ADA Compliant
• UL399 and CAN/CSA 22.2 No. 120 Certied
• ANSI/NSF 61 and 372 Certied
• GreenSpec
®
Listed
The above ratings apply only to the EZWS-ERFP8-RF unit.
Ratings for cooler not included.
Model
EZWS-ERFP8-RF