Installation Sheet

17
1000003740 (Rev. A - 02/2017)
Operang the Keypad
To dispense your water serving
Hold down the buon for that dispenser.
Note: For safety reason, to dispense hot water you must hold down the upper hot water
buon rst and then the lower hot water/Energy Saving buon at the same me.
To stop dispensing your water serving
Release the buon for that dispenser.
To turn on Energy Saving mode
Press and release for less than 4 seconds the Energy Saving buon.
Note: The green LED on the right turns on.
NOTICE: E nergy Saving mode slows down the acvaon me of the
compression. This mode should only be used when the machine will not be
operated, such as when the business has closed for the day.
To turn o Energy Saving mode
Press the Energy Saving buon or any of the dispensing buons.
Alarms
The blue LED on the le is ashing if an alarm is acve:

Quick ashing - Lile or no water at the inlet

Slow ashing - Lile or no CO
2
remaining
To reset an alarm
Turn the machine o, then on again.
NOTICE: Alarms indicate a problem with the water, CO
2
, or electrical system of the machine. Do not operate
the machine unl the problem has been located and xed.
ENERGY
SAVING
ENERGY
SAVING
ENERGY
SAVING