Installation Sheet
15
1000003740 (Rev. A - 02/2017)
7. Purge the water lines.
1. Place receptacle beneath tap to catch dispensed water. Discard water as necessary.
2. Allow water to run connuously unl ow is clear of air.
3. Repeat for all taps.
NOTICE: The "No/low CO
2
" error LED will ash when dispensing begins. This is correct, as the CO
2
connecon has not been acvated yet. This alarm can be ignored during this step
.
8. Turn on the boiler
NOTICE: Never turn on the boiler unless you have lled the machine with water.
NOTICE: Never turn on the boiler when the inlet water is disconnected.
1. Open the front panel with the supplied key and press the boiler buon at the top center of machine.
2. Aer around 10 minutes, the water reaches the seed temperature.
CAUTION: Hot water reaches 185°F. Keep children away. Hot, boiling water and steam will scald if
spilled on skin. Do not touch the dispensing nozzle to avoid burns.
Press dispensing
buon
DSWH160UVPC