Installation Sheet
11
1000003740 (Rev. A - 02/2017)
Installing the Machine
CAUTION: Wear safety gloves when handling the machine. Metal edges are sharp, and touching them
could result in minor or moderate injury.
CAUTION: The unit weighs more than 100 lbs (45 kg) when the ice bank is lled. Liing without proper
support could result in minor or moderate injury.
1. Install external water lter and CO
2
cylinder.
1. Use (2) Phillips head screws to mount bracket to under-counter wall or DSCABWH cabinet panel.
2. Use (4) Phillips head screws to mount lter head to bracket.
3. Remove cap from lter. Insert lter into lter head and turn clockwise (right) unl it stops.
When installing external water ller within the DSCABWH cabinet, please refer to the following mounng
instrucons:
1. Use 3 Phillips head screws and washers to mount lter bracket to cabinet mounng strip as shown below.
NOTICE: Install CO
2
source per manufacturer’s recommendaons.
1. 2. 3.
DSCABWH