Installation Sheet

DSSBF8S
[phone] Elkay Manufacturing Company
2000000216 (Rev. B - 08/21)
Page 7
Use Proper Tools
Always use proper tools which are in good
working condition during the installation of the
product. Using tools other than those listed could
adversely a󰀨ect the product and could result in
property damage.
2.4 Property Damage
Inspect Before Cutting
Make sure no electrical wiring or plumbing is
present before cutting into a wall.
3. Tools and Supplies
3.1 Tools Required
Tool Used For
Power Drill Installation of anchor fasteners for securing
unit to floor
Adjustable Pliers Installation of P-trap
Adjustable Wrench Installation of water inlet valve
Hacksaw Trimming waste outlet pipe
Flat Blade
Screwdriver
Adjustment of pressure regulator and
coldness control valve
5/16” Nut Driver Removal of mounting bracket and front
panel
Tubing Cutters To trim excess poly tube
Phillips Screwdriver To install the top access panel on top of the
cooler unit
3.2 Installer-Supplied Parts
Description Qty.
Fasteners to anchor unit to floor (varies due to flooring
surface)
2
Flat w ashers 2
P-trap with 1-1/2” inlet (single unit) 1
Quarter turn shut-off valve with angled 3/8” outlet
(filtered units)
1