Installation Sheet
11
1000002475 (Rev. D - 04/2016)
Installing the Water Cooler and the Supply Head
CAUTION: Wear safety gloves when handling the machine. Metal edges are sharp, and touching them
could result in minor or moderate injury.
CAUTION: Water cooler weighs more than 100 lbs (45 kg) when the ice bank is lled. Liing without
proper support could result in minor or moderate injury.
1. Install external water lter and CO
2
cylinder.
1. Use (2) Phillips head screws to mount bracket to under-counter wall.
2. User (4) Phillips head screws to mount lter head to bracket.
3. Remove cap from lter. Insert lter into lter head and turn clockwise (right) unl it stops.
NOTICE: Install CO
2
source per manufacturer’s recommendaons.
1. 2. 3.