Installation Sheet

PAGE 3 98421C (Rev. C - 09/17)
HDFF-EBPFR*A HDFF-BLEBPFR*A HDFF-BLREBPFR*A
FIG. 2
1. Wall should already be framed for the fountain using dimensions shown in Fig. 1. Shown dimensions pertain to installation location.
These dimensions are required for compliance with ANSI Standard A117.1. and ADA (Framing shown for reference only).
2. Remove bottom cover from fountain and save the screws.
3. Install the fountain using bolts and washers (provided). Tighten securely.
4. Attach drain tube to fountain and cut to required length using the freeze resistant box as a guide.
5. Install freeze-resistant box - see box instructions.
6. Replace bottom cover.
HDF-EBP-FR WITH WALL PLATE ASSEMBLY
ROUGH-IN DRAWINGS
FINISHED FLOOR
12 1/8"
309mm
19 3/4"
502mm
20 3/8"
518mm
6 1/2"
167mm
27"
686mm
ADA
REQUIREMENT
18"
457mm
5/8"
16mm
12"
305mm
MAX. WALL
THICKNESS
3 5/8"
91mm
2 5/8"
66mm
14 7/16"
366mm
17 15/16"
455mm
13 3/8"
339mm
28 13/16"
732mm