Specifications

1006-CP

Stops and Supplies

Architect/Engineer Specification

________________________________________________________________________________________________________

Chicago Faucets No. 1006-CP, Angle with Supply Tube Mounted Angle Stop Fitting with Supply Tube and Loose Key, polished

chrome plated solid brass construction. 2 1/4 Metal Tee handle(s) with Tapered Square. Slow compression rebuildable cartridge,

opens and closes 360° for fine adjustment, closes with water pressure, features square tapered stem. Integral inlet shank(s)

contains standard 1/2" NPT Female Thread Inlet. 1/2" O.D. Female Compression Outlet. Slip Wall Flange. 1/2" O.D. x 12"

Bullnose Flexible Supply Riser. Mounting hardware included. This product is tested and certified to industry standards: ASME

A112.18.1/CSA B125.1, and Certified to NSF/ANSI 61, Section 9 by CSA.

Operation and Maintenance

________________________________________________________________________________________________________

Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,

remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the

product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm

water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the

installation instructions and repair parts documents that are located at www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,

offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.

Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.

Last Revision: 08/12/2011 • Date Printed: 09/8/2011 • Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL

P: 847/803-5000

F: 847/803-5454

Technical: 800/TEC-TRUE