Plumbing Submittals Corelabs Phase 2 Submitted By SC Plumbing Co. 2/28/2012 Moore Supply Co League City 2430 West Main, (Hwy 518) League City, TX 77573 Phone: 281-332-6225 Fax: 281-338-0060 www.mooresupply.
Spec# Table of Contents 1 2 3 4 5 6 7 8 ............ ** EDF-1 ** /00021258179 EL EMABFTL8SC SS BI/LVL COOLER MG8912CBECO MG 8912CBECO 1-1/2 17GA P-TRAP BR N MG2165 2165 1/2IPSX3/8OD LAV SUPPLY CP E98324C EL 98324C KIT-CANE APRON-SS ............ ** TRAP GUARDS ** TG33ZURN TG33-ZURN TRPGRD F/ZRN Z400/Z41 STR ............ ** L-1 ** 9 /00021258184 A/S 0614.000.
Spec# 25 Table of Contents ............ ** WC-1,WC-2 ** 26 /00021298404 AS 2856.128 AFWLL EL 1.28 W/FV COMB 27 B1655CWHI 1655C BEMIS XH EL OF CLO SEAT WHT 28 29 30 ............ ** LS-1 ** /00021258189 CF 930-VR317CP DECK WATER FITT CP ............ ** SH-1 ** 31 L1363BFSCLWH 1363-BFSC 36IN F/G ADA SHR LH ST WH 32 JSD40101 JS D40-101 (101-PNC) SHWR DRN W/STR 33 /00021258190 A/S 1662.604.002 CP SHR KT 24 BAR 34 /00021258192 A/S T372.248.002 CP SHWR TRIM ONLY 35 ............
Spec Seq#: 1 ** EDF-1 **
Spec Seq#: 2 ® SPECIFICATIONS GENERAL Self-contained, double wall hung electric refrigerated, water cooler. Capacity 8.0 GPH of 50°F drinking water, based upon 80°F inlet water and 90°F ambient. All models have a hooded stream projector with self closing push bars on front and both right and left sides. Patented* valve with built-in flow regulator provide constant stream from 20 to 105 psi (138 to 724 KPa) water pressure. Bubbler orifice fully protected to meet all sanitary codes.
Spec Seq#: 2 Two Station Wall Mount Water Cooler Barrier-Free Access (Adult or Child) NSF/ANSI 61 Compliant Models EMABFTL8C and EMABFTLDDC ® INSTALLER PLEASE NOTE: IMPORTANT THIS WATER COOLER HAS BEEN DESIGNED AND BUILT TO PROVIDE WATER TO THE USER WHICH HAS NOT BEEN ALTERED BY MATERIALS IN THE COOLER WATERWAYS. THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING BUT MAY ALSO OCCUR AWAY FROM THE BUILDING.
Spec Seq#: 3 60 Grandview Court P.O. Box 746 Cheshire, CT 06410 203-699-1801 Fax: 203-699-1813 www.mcguiremfg.com P R O D U C T S 8872CBECO, C8872CECO, 8904CBECO 8912CBECO, C8912CECO, 8912CNCBECO, 8912C18BECO PRODUCT SPECIFICATION Job Name: Cast Body P-Trap With or Without Cleanout Submittal Number: Rubber Washer Filet 1-1/4" O.D. – 1-1/2" O.D.
Spec Seq#: 4 P R O D U C T S Part No. McGUIRE MFG. CO., INC. 60 Grandview Court P.O. Box 746 Cheshire, CT 06410 203-699-1801 Fax 203-699-1813 www.mcguiremfg.com Product Job Name: 2165, 2165LK, 2167, 2167LK Lavatory Supply 1/2" I.P.S. x O.D. Specification Submittal Number: Wheel Handle w/ 12" Riser MG2165 QUALITY DESIGNED Loose Key w/ 12" Riser 12" 12" Brass Stem Brass Stem A A C C B B NO. ROUGHING MEASUREMENTS A B C 2165 2165LK 2167 2167LK 1/2" I.P.S. x 3/8" O.D. 1/2" I.P.S.
Spec Seq#: 5 ® Accessory Apron Model 98234C SPECIFICATIONS GENERAL Accessory apron designed to bring Elkay VRC series vandalresistant water coolers in compliance with the Americans with Disabilities Act (A.D.A.) when units are mounted on an exposed wall. This apron provides the mandatory 27" (686mm) floor to underside requirement when properly installed.* E98324C CONSTRUCTION 300 Series stainless steel construction. *Adult ADA requirement. 24" (609mm) for child ADA requirement.
Spec Seq#: 6 ** TRAP GUARDS **
TG33ZURN Spec Seq#: 7
Spec Seq#: 8 ** L-1 **
Spec Seq#: 9 STUDIO™ UNDERCOUNTER SINK VITREOUS CHINA BARRIER FREE • • • • /00021258184 STUDIO™ UNDERCOUNTER SINK Rectangular undercounter mount sink Made from vitreous china Front overflow Supplied with mounting kit (047194-0070A) and template ❏ 0614.000 Unglazed Rim ❏ 540 x 387mm (21-1/4" x 15-1/4") 0614.300 Glazed underside Bowl size: 464mm (18-1/4") wide 308mm (12-1/8") front to back 171mm (6-3/4") deep ❏ 0618.000 Unglazed Rim ❏ 600 x 422mm (23-5/8" x 16-5/8") 0618.
MECHANICAL FAUCETS 404-317CP Sink Faucets Product Type ___________________________________________________ Deck Mounted Concealed Hot and Cold Water Sink Faucet Job Name ________________________________________________ Features & Specifications ___________________________________________________ • 8" Fixed Centers • 2.2 GPM (8.
404-317CP Sink Faucets Architect/Engineer Specification ________________________________________________________________________________________________________ Chicago Faucets No. 404-317CP, Deck Mounted Concealed Hot and Cold Water Sink Faucet, polished chrome plated solid brass construction. 5" Center to Center Rigid Cast Brass Spout. 2.2 GPM (8.3 L/min) Pressure Compensating Softflo Aerator. 4" Metal Wristblade handle(s) with Sixteen Point Tapered Broach and Secured Blue and Red Buttons.
Spec Seq#: 11 Part No. McGuire Manufacturing Co., Inc. 60 Grandview Court P.O. Box 746 Cheshire, CT 06410 203-699-1801 Fax: 203-699-1813 www.mcguiremfg.com P R O D U C T S PRODUCT SPECIFICATION Job Name: 155AECO Open Grid P.O. Plug Submittal Number: 2-1/4" Polished Chrome Cast Brass P.O. Plug 2-9/16" 19 Holes 7/32" 1"Min. Thread 1-1/2" - 16 Rubber Washer Friction Washer Brass Locknut Threaded Joint 8-5/16" 6" ECO-LINE 1-1/4" O.D. Certified Specifications: Cast Brass Chrome Plated Open Grid P.
Spec Seq#: 12 60 Grandview Court P.O. Box 746 Cheshire, CT 06410 203-699-1801 Fax: 203-699-1813 www.mcguiremfg.com P R O D U C T S 8872CBECO, C8872CECO, 8904CBECO 8912CBECO, C8912CECO, 8912CNCBECO, 8912C18BECO PRODUCT SPECIFICATION Job Name: Cast Body P-Trap With or Without Cleanout Submittal Number: Rubber Washer Filet 1-1/4" O.D. – 1-1/2" O.D.
MECHANICAL FAUCETS 1006-CP Stops and Supplies Product Type ___________________________________________________ Angle with Supply Tube Mounted Angle Stop Fitting with Supply Tube and Loose Key Job Name ________________________________________________ Item Number _____________________________________________ Features & Specifications ___________________________________________________ • Stops with 1/2" Inlet • 2 1/4 Tee Handle • Slow Compression Operating Cartridge • 1/2" NPT Female Thread Inlet • 1/2" O.D.
1006-CP Stops and Supplies Architect/Engineer Specification ________________________________________________________________________________________________________ Chicago Faucets No. 1006-CP, Angle with Supply Tube Mounted Angle Stop Fitting with Supply Tube and Loose Key, polished chrome plated solid brass construction. 2 1/4 Metal Tee handle(s) with Tapered Square. Slow compression rebuildable cartridge, opens and closes 360° for fine adjustment, closes with water pressure, features square tapered stem.
Lav Guard2 Sbmttl 2-07 2/7/07 2:22 PM Page 1 Spec Seq#: 14 ADA-compliant undersink protection Submittal Sheet LAV GUARD® 2 E-Z Series waste and supply piping covers satisfy ADA compliance requirements. Built-in E-Z Grip internal fasteners and internal, E-Z Tear-To-Fit trimming feature allow for fast installation without tools. Series #100 E-Z kits are designed to fit on all tubular and cast brass P-trap assemblies.
Spec Seq#: 15 ** L-2 **
Spec Seq#: 16 LUCERNE™ WALL-HUNG LAVATORY VITREOUS CHINA AS0356015WH BARRIER FREE LUCERNE™ WALL-HUNG LAVATORY • • • • • Wall-hung sink Vitreous china Front overflow D-shaped bowl Self-draining deck area with contoured back and side splash shields • Faucet ledge Faucet holes on 203mm (8") centers (Illus.): ❏ 0356.028 For exposed bracket support Shown with 4801.862 Amarilis Heritage faucet with Triune Cross handles (not included) ❏ 0356.015 For wall hanger (included) or concealed arms support ❏ 0356.
Spec Seq#: 16 LUCERNE™ WALL-HUNG LAVATORY VITREOUS CHINA 0356.015 8" CTRS FOR WALL HANGER OR CONCEALED ARMS CONCEALED ARMS EXTRA RIGHT HAND HOLE 86 mm (3-3/8) 102 mm (4) 54mm 203 mm (2-1/8) (8) FINISHED WALL 152 mm (6) 152 mm (6) 86 mm (3-3/8) 102 mm (4) 203 mm (8) FINISHED WALL 0356.037 8" CTRS FOR WALL HANGER OR 152 mm (6) 165 mm (6-1/2) 464 mm (18-1/4) 203 mm (8) 152 mm (6) 464 mm (18-1/4) 203 mm (8) 8 mm (5/16) 8 mm (5/16) (6) 25mm (1") DIA. ACCESS HOLES FOR CONC.
Spec Seq#: 16 LUCERNE™ WALL-HUNG LAVATORY VITREOUS CHINA 0355.012 4" CTRS FOR WALL HANGER OR CONCEALED ARMS 4" CTRS FOR WALL HANGER OR CONCEALED ARMS EXTRA RIGHT HAND HOLE 86 mm (3-3/8) 102 mm (4) 54 mm (2-1/8) 203 mm (8) FINISHED WALL 152 mm (6) 152 mm (6) 464 mm (18-1/4) 102 mm (4) 152 mm (6) 86 mm (3-3/8) 102 mm (4) 203 mm (8) FINISHED WALL 0355.034 464 mm (18-1/4) 102 mm (4) 152 mm (6) 165 mm (6-1/2) 8 mm (5/16) 8 mm (5/16) (6) 25mm (1") DIA. ACCESS HOLES FOR CONC.
Spec Seq#: 16 LUCERNE™ WALL-HUNG LAVATORY VITREOUS CHINA 0356.421 SINGLE CENTER HOLE FOR WALL HANGER OR CONCEALED ARMS 0356.137 SINGLE CENTER HOLE FOR WALL HANGER OR CONCEALED ARMS WITH EXTRA RIGHT HAND HOLE 44mm (1-3/4) DIA. STD. OUTLET 25mm (1-3/8) DIA. PUNCHING 44mm (1-3/4) DIA. STD. OUTLET 25mm (1-3/8) DIA.
MECHANICAL FAUCETS 786-GN2FCCP Sink Faucets Product Type ___________________________________________________ Deck Mounted 8" Fixed Centers Concealed Hot and Cold Water Sink Faucet Job Name ________________________________________________ Item Number _____________________________________________ Features & Specifications ___________________________________________________ • 8" Fixed Centers • 5 1/4" Flow Control Rigid / Swing Gooseneck Spout • 4" Wristblade Handle • Quaturn Compression Operating Cartridge
786-GN2FCCP Sink Faucets Architect/Engineer Specification ________________________________________________________________________________________________________ Chicago Faucets No. 786-GN2FCCP, Deck Mounted 8" Fixed Centers Concealed Hot and Cold Water Sink Faucet, polished chrome plated solid brass construction. 5 1/4" Center to Center Flow Control Rigid / Swing Gooseneck Spout. 1.5 GPM (5.7 L/min) Laminar Flow Control Insert in Spout Inlet.
Spec Seq#: 18 P R O D U C T S Part No. McGuire Manufacturing Co., Inc. 60 Grandview Court P.O. Box 746 Cheshire, CT 06410 203-699-1801 Fax: 203-699-1813 www.mcguiremfg.com 155WCECO Offset Lavatory Grid Strainer PRODUCT SPECIFICATION Job Name: Submittal Number: Polished Chrome Cast Brass P.O. Plug 2-1/4" 19 Holes 7/32" 2-9/16" 1" Min. Thread 1-1/2" - 16 Rubber Washer Friction Washer Polished Chrome Cast Brass Elbow Threaded Joint 8-7/8" 5-1/8" ECO-LINE 1-1/4" O.D. 17 Gauge Tailpiece A.D.A.
Spec Seq#: 19 60 Grandview Court P.O. Box 746 Cheshire, CT 06410 203-699-1801 Fax: 203-699-1813 www.mcguiremfg.com P R O D U C T S 8872CBECO, C8872CECO, 8904CBECO 8912CBECO, C8912CECO, 8912CNCBECO, 8912C18BECO PRODUCT SPECIFICATION Job Name: Cast Body P-Trap With or Without Cleanout Submittal Number: Rubber Washer Filet 1-1/4" O.D. – 1-1/2" O.D.
Spec Seq#: 20 P R O D U C T S Part No. McGUIRE MFG. CO., INC. 60 Grandview Court P.O. Box 746 Cheshire, CT 06410 203-699-1801 Fax 203-699-1813 www.mcguiremfg.com Product Job Name: 2165, 2165LK, 2167, 2167LK Lavatory Supply 1/2" I.P.S. x O.D. Specification Submittal Number: Wheel Handle w/ 12" Riser Loose Key w/ 12" Riser 12" 12" Brass Stem Brass Stem A A C C B B NO. ROUGHING MEASUREMENTS A B C 2165 2165LK 2167 2167LK 1/2" I.P.S. x 3/8" O.D. 1/2" I.P.S. x 3/8" O.D. 1/2" I.P.S.
Lav Guard2 Sbmttl 2-07 2/7/07 2:22 PM Page 1 Spec Seq#: 21 ADA-compliant undersink protection Submittal Sheet LAV GUARD® 2 E-Z Series waste and supply piping covers satisfy ADA compliance requirements. Built-in E-Z Grip internal fasteners and internal, E-Z Tear-To-Fit trimming feature allow for fast installation without tools. Series #100 E-Z kits are designed to fit on all tubular and cast brass P-trap assemblies.
Lav Guard2 Sbmttl 2-07 2/7/07 2:22 PM Page 1 Spec Seq#: 22 ADA-compliant undersink protection Submittal Sheet LAV GUARD® 2 E-Z Series waste and supply piping covers satisfy ADA compliance requirements. Built-in E-Z Grip internal fasteners and internal, E-Z Tear-To-Fit trimming feature allow for fast installation without tools. Series #100 E-Z kits are designed to fit on all tubular and cast brass P-trap assemblies.
Spec Seq#: 23 ** U-1 **
Spec Seq#: 24 WASHBROOK® FloWise® 0.125 GPF ULTRA HIGH EFFICIENCY URINAL SYSTEM MANUAL FLUSH VALVE BARRIER FREE /00021258186 WASHBROOK® FloWise ® 0.125 GPF ULTRA HIGH EFFICIENCY URINAL SYSTEM ❏ 6590.503 0.125 gpf Exposed Top Spud Urinal and Manual Piston-Type Urinal Flush Valve URINAL: • Vitreous china • Ultra High Efficiency, Low Consumption. Operates in the range of 0.125 gpf to 1.0 gpf (0.5 Lpf to 3.
Spec Seq#: 24 WASHBROOK® FloWise® 0.125 GPF ULTRA HIGH EFFICIENCY URINAL SYSTEM MANUAL FLUSH VALVE FINISHED WALL SUPPLY DN 20mm (3/4" I.P.S.) 64mm (2-1/2") 108mm-133mm (4-1/4" to 5-1/4") ROUGH-IN DIMENSION 295mm (11-1/2") -C-L- *CRITICAL LEVEL -C-L- 343mm (13-1/2") K2 HANGERS 8mm X 25mm (5/16" X 1") SLOT 343mm (13-1/2") 480mm (18-7/8") 438mm (17-1/4") 235mm (9-1/4") 464mm (18-1/4") 664mm (26-1/8") REF.
Spec Seq#: 25 ** WC-1,WC-2 **
Spec Seq#: 26 AFWALL® FloWise® 1.28 GPF FLUSHOMETER TOILET SYSTEM with EVERCLEAN ® MANUAL FLUSH VALVE BARRIER FREE /00021298404 AFWALL® FloWise ® 1.28 GPF FLUSHOMETER TOILET SYSTEM with EVERCLEAN ® ❏ 2856.128 1.28 gpf Exposed Top Spud Bowl and Manual Flush Valve BOWL: • Wall-mount elongated flushometer valve toilet • Vitreous china • High Efficiency, Low Consumption. Operates in the range of 1.1 gpf to 1.6 gpf (4.2 Lpf to 6.
Spec Seq#: 26 AFWALL® FloWise® 1.28 GPF FLUSHOMETER TOILET SYSTEM /00021298404 with EVERCLEAN ® MANUAL FLUSH VALVE BARRIER FREE FINISHED WALL 660mm (26") 73mm (2-7/8") 343mm (13-1/2") 470mm (18-1/2") -C-L- C/L OF SEAT POST HOLES 140 mm (5-1/2") CENTER 19mm (3/4") 95mm (3-3/4") 330mm (13") 381mm (15") FINISHED FLOOR 70mm (2-3/4") 133mm (5-1/4") SUPPLY DN 25mm (1" I.P.S.
Spec Seq#: 27 C O M M E R C I A L P L A S T I C S E A T S SERIES 1655C Seats shall be No. ___________ as manufactured by Bemis Manufacturing Co. Seats shall be extra heavy weight and injection molded of solid plastic. Seats shall be open front less cover for elongated bowl and feature large molded-in bumpers. External check hinges to feature 300 Series stainless steel posts that stop seat 11 degrees beyond vertical. Uses 300 Series stainless steel hardware. Color to be ___________.
Spec Seq#: 28 ** LS-1 **
/00021258189 Spec Seq#: 29
Spec Seq#: 30 ** SH-1 **
Aquatic products may be specified as Lasco Bathware.
Submittal Sheet 1363BFSC Aquatic products may be specified as Lasco Bathware. ADA Compliant FRAMIN G DIMEN SION S Please indicate changes needed. 22 1/2" SLIP-RESISTANT SURFACE 1 1/2" Inches (mm) A B C D 38 1⁄8 (970) 19 (480) 38 1⁄4 (970) 19 (480) Installation Options: 1. Install in a recessed pit for rough-in floor installation. 2. Build sub-floor to level finishedfloor with top of shower skirt. 1" 14 1/2" 19" 33" 38 1/4" O.A. Ø 3 1/4" DRAIN D C 19" 1 1/4" 15" 3" 6" (155) Dia.
Spec Seq#: 32 SPECIFICATION SUBMITTAL SHEET j o n e s s t e p h e n s c o r p o r a t i o n PART NO. D40-101 features and benefits: • Fits over 2” schecule 40 DWV pipe • Snap-in strainer • Wrench included • For 2” CTS order gasket separately • Meets ASTM D2665-07 This product and others like it can be found in the Jones Stephens catalog. Call today to order your catalog or download it from our website: www.plumbest.com PART NO.
Spec Seq#: 33 SHOWER SYSTEMS MODEL NUMBER: 1662.604 Shower System Kit Includes: • Water Saving Soft Hand Shower • Hose • Wall Supply • Standard Slide Bar 1660.502 8888.035 8888.037 1660.
Spec Seq#: 33 SHOWER SYSTEMS CODES AND STANDARDS FLOW RATE Hand Shower 3 GALLONS PER MINUTE Install as required to comply with local code requirements. ASME A112.18.1 CSA 125 2 1 0 20 40 60 80 100 INLET PRESSURE (PSI) Finish Options Product Number 1662.604 Description Polished Chrome PVD Satin Nickel 002 295 Shower System Kit. Contains Water Saving “Soft” hand shower, hose, wall supply and Deluxe Slide Bar. © 2011 AS America Inc.
Spec Seq#: 34 COLONY® PRESSURE BALANCE BATH/SHOWER FITTING MODEL NUMBER: TRIM KITS: T375.128 Colony BATH/SHOWER Trim Kit Lever Handle. FloWise Showerhead. LESS Valve Body. T375.248 Colony BATH/SHOWER Trim Kit Metal Lever Handle. FloWise Showerhead. LESS Valve Body. T372.128 Colony SHOWER ONLY Trim Kit Lever Handle. FloWise Showerhead. LESS Valve Body. T372.248 Colony SHOWER ONLY Trim Kit Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
Spec Seq#: 34 COLONY® PRESSURE BALANCE BATH/SHOWER FITTING VALVE BODY OPTIONS INLETS 103mm (4-1/16") FINISHED WALL SHR. 1/2" NOM. COPPER SWEAT 51.5mm (2-1/32") INLETS 1/2" NOM. COPPER SWEAT 102mm (4") REF. 103mm (4-1/16") TUB 1/2" NOM. COPPER SWEAT SWEAT (R110) 171mm (6-3/4") 178mm (7") REF. 1880mm (74") FOR HEAD 152mm CLEARANCE (6") 149mm (5-7/8") SHR. 1/2" NOM. COPPER SWEAT INLETS 1/2" NPT TUB 1/2" NOM.
Spec Seq#: 35 QUALIFY 4 WEEK ETA
Spec Seq#: 36 SHOWER SYSTEMS MODEL NUMBER: 1662.600 Shower System Kit Includes: • Soft Hand Shower • Hose • Wall Supply • Standard Slide Bar 1660.500 8888.035 8888.037 1660.
Spec Seq#: 36 SHOWER SYSTEMS CODES AND STANDARDS FLOW RATE Hand Shower 3 GALLONS PER MINUTE Install as required to comply with local code requirements. ASME A112.18.1 CSA 125 2 1 0 20 40 60 80 100 INLET PRESSURE (PSI) Finish Options Product Number 1662.600 Description Polished Chrome PVD Satin Nickel 002 295 Shower System Kit. Contains “Soft” hand shower, hose, wall supply and deluxe slide bar. © 2011 AS America Inc.
/00021258194 Spec Seq#: 37
Spec Seq#: 38 ** EWH-1 **
Spec Seq#: 39 3KW - 12KW Electric Commercial Water Heaters 3KW thru 12KW Electric commercial water heaters are designed to provide hot water where applications require moderate quantities. These units are suited for a wide variety of applications such as retail stores, small offices or any location where a moderate amount of hot water is required.
Spec Seq#: 39 3KW - 12KW Electric continued. DIMENSIONAL INFORMATION (All dimensions shown in English and Metric) A TANK CAPACITY MAX WATTS GALLONS LITERS inches 12,000 30 114 29-1/2 12,000 38 144 31-1/2 12,000 47 178 32-1/2 9,000 30 114 45-1/2 12,000 40 151 46-1/4 12,000 50 189 57 12,000 65 246 58-3/4 12,000 80 303 59 12,000 119.9 454 62-1/2 Thermostat Minimum Temperature: Type: 110°F (43.3°C) Surface Mounted B mm 750 800 813 1156 1175 1448 1492 1499 1586 APPROX. SHIPPING WT. lbs. kgs.
Spec Seq#: 40 ES-N36 For Water Heater/Tank Applications Contractor ––––––––––––––––––––––––––––––––––––––––––––– Job Location –––––––––––––––––––––––––––––––––––––––––– Approval – ––––––––––––––––––––––––––––––––––––––––––––– Engineer –––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No.
Spec Seq#: 40 Materials Dimensions-Weights Cover - Polypropylene A B Disc - Silicone Body - Brass Components Spring - 302 Stainless Steel Size (DN) DIMENSIONS A Float - Glass Filled Polysulfone mm in. mm in. mm oz. gr. ⁄ ⁄ 15 20 2 2 50 50 2 2 50 50 4 4 113 113 12 Pressure/Temperature Maximum steam working pressure: 15 psi (1.03 bars) Maximum temperature: 250°F (121°C) B in. 34 Capacity Size (DN) in.
Spec Seq#: 41 ADD BELOW IF NEEDED
Spec Seq#: 42 ES-PLT For Water Heater and Hot Water Storage Tank Applications Job Name – ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––– Job Location –––––––––––––––––––––––––––––––––––––––––– Approval – ––––––––––––––––––––––––––––––––––––––––––––– Engineer –––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No.
Spec Seq#: 42 Selection SUPPLY PRESSURE (PSIG) This Quick Reference Selection Guide may be used as an alternative to using a formula to determine the correct expansion tank for the system. This table is based upon a relief valve setting of 150psi (10.3 bar), and a maximum of 50°F temperature rise.
Spec Seq#: 43 ** DHWP-1 **
Spec Seq#: 44 Series UP Submittal Data 60 Cycle JOB or CUSTOMER: ENGINEER: CONTRACTOR: SUBMITTED BY: DATE: APPROVED BY: DATE: ORDER NO: DATE: SPECIFICATION REF: QUANTITY TAG NO. MODEL NO. GPM FEET VOLT PHASE COMMENTS Mounting Positions Technical Data FLOW RANGE: 0 to 46 U.S. GPM MIN. FLUID TEMPERATURE for UP15: 36°F (2°C) HEAD RANGE: 0 to 32 Feet MIN.
Spec Seq#: 44 Performance Stainless Steel or Bronze Construction - Flange, Union, or Sweat Mount HEAD (FT.) HEAD (FT.) 4 UP 15-42 B7 G 5 UP 15-18 B7 G 6 UP 15-10 B7 G /00021298406 1 UP 15-42 B5 G 2 UP 15-18 B5 G 3 UP 15-10 B5 G CAPACITY (U.S. GPM) CAPACITY (U.S. GPM) 7 UP 26-99 BF G 11 8 UP 43-75 BF G 9 UP 26-96 BF G 12 10 UP 25-64 SU & SF G 11 UP 15-42 SU & SF G 13 12 UPS 15-42 SU & SF Spd. 3 G 13 UPS 15-42 SU & SF Spd. 2 1 12 G 14 UP 15-18 SU & SF G 15 UPS 15-42 SU & SF Spd.
Spec Seq#: 45 QUALIFY ALT TO B&G
