Setting Up Insteon Control

Figure 5
Once you have reached this point you are going to refer to the paper
where you wrote down the IP address and Port address of the ELK
M1XEP.
You will type that information in the boxes provided.
See Fig 5. When you have finished you should click save on the bottom
of the screen. Now click on the “Generate ELK export file” button and
save it to the desktop.
Now it is time to go back to the ELK and login into the M1Gold by
using the steps we learned before.
Once you have logged in you will go to the lighting area under automation. If
you right click on lighting you will see a line called import lighting(you must be
using RP access version 1.6.24 or higher). See Fig 6.