Installation Manual

ManualsBrandsElk ManualsHome AutomationInsteon-Compatible Elk M1 Gold Kit and ISY-994i with Dual-Band Insteon Interface

M1G Installation and Programming

Page 33

12345678901234567890123456789012123

234567890123456789012345678901212

12345678901234567890123456789012123

CT01:=00600 secr

BurgDuration

12345678901234567890123456789012123

234567890123456789012345678901212

12345678901234567890123456789012123

CT02:=00000 secr

FireDuration

Menu 06 - Alarm Duration Timers

12345678901234567890123456789012123

234567890123456789012345678901212

12345678901234567890123456789012123

06-Alarm Cutoff r

Timers

Alarm Cutoff Timers Description of Option

††† Burglar Alarm duration time in seconds. Default time is 00600 sec. (10 min.). Burglar

always activates Siren/Voice Output (Out1) and Siren Output (Out2). Additional outputs

may be programmed using the RP software “Rules” function.

Fire Alarm duration time in seconds. Default time is 65535 sec. (never cutoff). Fire always

activates Siren/Voice Output (Out1) and Siren Output (Out2). Additional outputs may be

programmed using the RP software “Rules” function.

Medical Alarm duration time in seconds. Default is 00600 sec. (10 min.). Medical always

activates Siren/Voice Output (Out1) and Siren Output (Out2). Additional outputs may be

programmed using the RP software “Rules” function.

Audible Police Alarm duration time in seconds. Default time is 00600 sec. (10 min).

Audible Police always activates Siren/Voice Output (Out1) and Siren Output (Out2).

Additional outputs may be programmed using the RP software “Rules” function.

CO (Carbon Monoxide) Alarm duration time in seconds. The default time is 00600 sec. (10

min.). This alarm type is not preassigned to any outputs. The RP software “Rules”

function must be used to assign outputs.

Emergency Alarm duration time in seconds. The default time is 00600 sec. (10 min.).

This alarm type is not preassigned to any outputs. The RP software “Rules” function must

be used to assign outputs.

Freeze Alarm duration time in seconds. The default time is 00600 sec. (10 min.). This

alarm type is not preassigned to any outputs. The RP software “Rules” function must be

used to assign outputs.

Gas Alarm duration time in seconds. The default time is 00600 sec. (10 min.). This alarm

type is not preassigned to any outputs. The RP software “Rules” function must be used

to assign outputs.

Heat Alarm duration time in seconds. The default time is 00600 sec. (10 min.). This alarm

type is not preassigned to any outputs. The RP software “Rules” function must be used

to assign outputs.

Water Alarm duration time in seconds. The default time is 00600 sec. (10 min.). This

alarm type is not preassigned to any outputs. The RP software “Rules” function must be

used to assign outputs.

Aux 1 Alarm duration time in seconds. The default time is 00600 sec. (10 min.). This

alarm type is not preassigned to any outputs. The RP software “Rules” function must be

used to assign outputs.

Aux 2 Alarm duration time in seconds. The default time is 00600 sec. (10 min.). This

alarm type is not preassigned to any outputs. The RP software “Rules” function must be

used to assign outputs.

12345678901234567890123456789012123

234567890123456789012345678901212

12345678901234567890123456789012123

CT03:=00600 secr

Med Duration

12345678901234567890123456789012123

234567890123456789012345678901212

12345678901234567890123456789012123

CT04:=00600 secr

Pol Duration

Each alarm type has a cutoff timer. Any output(s) activated by the alarm type will turn off when the cutoff timer expires.

If multiple alarm types are assigned to a single output, all alarms must turn off before the output can turn off. Range is

00000 to 65535 seconds. 00000=Never turn on. 65535=Never turn off NOTE: 65535 sec = 1,092 minutes or 18.2 hrs.

12345678901234567890123456789012123

234567890123456789012345678901212

12345678901234567890123456789012123

CT05:=00600 secr

CO Duration

12345678901234567890123456789012123

234567890123456789012345678901212

12345678901234567890123456789012123

CT06:=00600 secr

EmerDuration

12345678901234567890123456789012123

234567890123456789012345678901212

12345678901234567890123456789012123

CT07:=00600 secr

FrezDuration

12345678901234567890123456789012123

234567890123456789012345678901212

12345678901234567890123456789012123

CT08:=00600 secr

Gas Duration

12345678901234567890123456789012123

234567890123456789012345678901212

12345678901234567890123456789012123

CT09:=00600 secr

HeatDuration

12345678901234567890123456789012123

234567890123456789012345678901212

12345678901234567890123456789012123

CT10:=00600 secr

WatrDuration

Press RIGHT arrow key to select this menu. Press UP or DOWN arrow keys to select

another menu. The ELK key backs up one menu level. To exit press the * or Exit key.

12345678901234567890123456789012123

234567890123456789012345678901212

12345678901234567890123456789012123

CT11:=00600 secr

Aux1Duration

12345678901234567890123456789012123

234567890123456789012345678901212

12345678901234567890123456789012123

CT12:=00600 secr

Aux2Duration

††† See Appendix F for UL & ULC Requirements

NOTE: For ULC S303 compliance the Alarm Cutoff time must be set to 00900 (15 min.) or greater.

NOTE: For UL1637 compliance the Medical Alarm duration time must be set to 00300 (5 min.) or more.