Specifications

PO Box 100 • Hildebran, NC 28637 • 800-797-9355 • 828-397-4200
Fax [phone] • www.elkproducts.com • [e-mail]
The ELK-WSV2 is a new and improved model of our
highly popular electric water shutoff valve. It is designed
for residential and light commercial domestic water
applications. The WSV2 features a 12VDC high torque
on/off actuator motor as well as a manual control handle
for power outages. From the time of activation the WSV2
can shut off the main water supply to a building in just
under 2 seconds.
The ELK-WSV2 features a 1” full bore stainless steel
ball valve with commercial grade seats and seals. This
valve does not restrict water flow and meets the NSF
and NEMA approvals of state and municipal water
authorities. The motorized actuator has a permanently
lubricated gear drive with sufficient torque to open or close
the valve under high pressure or after long periods of
inactivity.
The ELK-WSV2 can be operated via a SPDT (single pole,
double throw) relay triggered from virtually any security
or automation controller. It can also be operated using a
simple SPDT Emergency push “Easy” button.
NOTICE: This valve is not designed, intended, or rated
for use in any fire sprinkler or fire alarm application.
• Rapid Opening / Closing Action
• Indoor Outdoor Use
• Provides Remote Shut off of Domestic Water Supply
• Manual control handle
• Integrates with a Security or Automation Control
(e.g. Elk-M1G or M1EZ8)
• Can be Integrated with a Simple “Easy” Button
• Can be Integrated with a Wireless Receiver and
Wireless Pushbutton
• Simple 12 VDC, Four (4) Conductor Hookup
• Valve Direction/Water Flow Indication
• Unit is sealed to withstand low pressure submersion
for short durations - Not intended for under water use
• Two (2) Year Warranty
• MADE IN USA
• Full Port, 2-way Ball Valve
• Stainless Steel Grade 316
• NSF 61 Approved for Drinking Water
• 1” NPT threaded pipe connections
• Max. Pressure Rating: 600 PSI
• Min./Max. Temperature Rating: 32° / 125° F
• Max. Flow Rating: 68 GPM
• Requires a 12 Volts DC Power Supply
• Nominal Current Draw: 800 mA to 1.5 Amp
• Actuating Speed: < 2 seconds
• NEMA 6P & 7D Enclosure
• Torque: 1.25 in. lbs.
• Connections: 18 gauge, 4 conductor cord
• Overall Dimensions: 7.75” H, 4.5” W, 4” D
Water Shutoff Valve ELK-WSV2
Features
Specifications
Stop water damage caused by broken pipes, leaking or broken hoses
from washing machines, ice makers, toilets, water heaters, etc.
3/4/2014