Instruction Manual

-4-
elkhome.com
BULB
22. Screw recommended bulbs (E12 candelabra bulb
type, not included) into sockets. Verify correct
bulb wattage marked on socket of xture.
WARNING: DO NOT exceed maximum bulb
wattage.
23. Raise shade (K) up to xture. Fit shade (K) inside
cage. Align holes along top of shade (K) with
holes in bars of cage.
24. Thread one thumbscrew (L) into hole in shade
and into hole in bar on cage. From inside shade
(K), slip one washer (N) over end of thumbscrew
(L). Screw threaded cap (M) onto end of
thumbscrew (L). DO NOT tighten threaded cap
(M) at this time.
25. Repeat step 24 to install remaining thumbscrews (L).
After all thumbscrews (L) have been installed,
fully tighten threaded caps (M).
M
K
L
N
CAGE
BAR
ITEM#: 82255/3
ITEM#: 82265/3
ITEM#: 82275/3