Instruction Manual

-3-
elkhome.com
E
A
D
ITEM#: 82192/3
E
PEG
L
BULB
K
TAB
14. Place backplate (D) over mounting bracket (A).
Align holes in top and bottom of backplate (D)
with holes in each tab of mounting bracket (A).
15. Screw one xture mounting screw (E) into each
hole in top and bottom of backplate (D) and into
holes in tabs on mounting bracket (A). Tighten
xture mounting screws (E) to secure xture to
wall.
16. Raise shade (K) up to xture. Pass hole in top of
shade (K) over socket. Align holes along shade
(K) with holes in pegs along socket. Thread one
threaded stud (L) into each hole along shade
(K) and into holes in pegs on socket. Tighten
threaded studs (L) to secure shade (K) in place.
DO NOT over tighten.
17. Repeat step 16 for remaining shade (K).
18. Screw recommended bulbs (E26 Edison bulb
type, not included) into sockets. Verify correct
bulb wattage marked on socket of xture.
WARNING: DO NOT exceed maximum bulb
wattage.