Installation Guide

-2-
elkhome.com
9. Carefully push xture wires up through end of
one 12 inch stem (M). Thread bottom of stem (M)
onto top of xture body (O).
10. Carefully push xture wires through remaining
stems (M). Screw stems (M) together keeping
xture wires taut. DO NOT pinch xture wires
between stems.
11. Carefully push xture wires up through bottom
of 6 inch stem (N). Pull xture wires out of top
of 6 inch stem (N). Screw bottom of 6 inch stem
(N) onto top of stem (M).
12. Push xture wires up through end of swivel (S)
on canopy (D). Screw top of stem (N) onto end of
swivel (S) on canopy (D).
A
ITEM#: 81505/3
ITEM#: 81515/3
C
GROUND SCREW
HOUSE GROUND
WIRE (COPPER)
FIXTURE
GROUND WIRE
Connect Supply (House) Ground Copper Wire to:
Bare Copper Wire or,
Bare Silver Wire or,
Green Insulated Wire.
M
N
S
D
13. Strip 3/4” of insulation from ends of xture
wires.
14. Slightly loosen ground screw on mounting
bracket (A). Do not completely remove ground
screw. Wrap house ground wire (copper)
around ground screw, leaving enough ground
wire to attach to xture ground wire. Twist
end of xture ground wire and end of house
ground wire together. Twist wire nut (C) onto
ends of wires. Completely tighten wire nut
(C). Reference chart below for correct wire
connections.
O