Technical Specifications

C-E2
© 2021 Eljer
BY AMERICAN STANDARD
spec_1451018 StrattonWP 4/21
33"
(838 mm)
19-3/4"(H)
(502 mm)
18-1/4"(C)
(464 mm)
C/L OF
OVERFLOW
16-1/2"
(419 mm)
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
60"
(1524 mm)
32-3/4"
(832 mm)
5-7/8"
(149 mm)
12"
(305 mm)
9"
(229 mm)
3"
(76 mm)
8-1/2"
(216 mm)
C/L OF DRAIN OUTLET
16-1/2"
(419 mm)
CUT OUT IN FLOOR
FOR DRAIN
PROVIDE ACCESS TO PUMP FOR
SERVICING ON ALLINSTALLATIONS
60 x 32-3/4 x 19-3/4 In.
(1524 x 832 x 502 mm)
65 Lbs. (30 Kg.)
524 Lbs. (237 Kg.)
55 Gal. (155 L.)
40-1/2 x 20-1/2 In.
(1029 x 521 mm)
15-1/4 In. (387 mm)
43 Lbs./Sq. Ft. (213 Kgs/Sq. m.)
GENERAL SPECIFICATIONS FOR STRATTON™ WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION.
SUPPORT BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL 3 WALL TILE FLANGE KIT AND APRON AVAILABLE AND MUST BE ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by IAPMO Z124.1.2
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded
or voided pages.
Stratton™
Whirlpool
HIGH GLOSS ACRYLIC