Technical Specifications

C-E28
© 2018 Eljer
BY AMERICAN STANDARD
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION.
SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
OPTIONAL 3 WALL TILE FLANGE KIT AND APRON AVAILABLE AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by IAPMO Z124.1.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
MERRICK
™
XL
WHIRLPOOL AND SOAKING TUB
HIGH GLOSS ACRYLIC
GENERAL SPECIFICATIONS FOR MERRICK™ XL WHIRLPOOL
72 x 36 x 23-3/4 In. (1829 x 914 x 603mm)
125 Lbs. (56 Kg.)
1,124 Lbs. (511 Kg.)
120 Gal. (454 L)
24-1/2" X 51" (622 X 1295 mm)
19-1/2 In. (495mm)
62 Lbs./Sq.Ft. (306 Kgs./Sq.m)
17.18
38.33
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
MODEL 025-0145
36"
(914mm)
30"
(762mm)
26"
(660mm)
72"
(1829mm)
63-1/2"
(1612mm)
51-1/2"
(1308mm)
18"
(457mm)
3"
(76mm)
3-1/4"
(83mm)
1-1/2"
(38mm)
8-1/4"
(209mm)
4"
(102mm)
72"
(1829mm)
32"
(813mm)
23-3/4"
(603mm)
20-1/4"
(514mm)
spec_025-0145 MerrickXL WP-T Rev. B 1/18