Technical Specifications

C-E30
© 2016 Eljer
BY AMERICAN STANDARD
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF
BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
OPTIONAL 3 WALL TILE FLANGE KIT AND APRON AVAILABLE AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM
PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1.2
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
GENERAL SPECIFICATIONS FOR MERRICK™ WHIRLPOOL
59-3/4 x 32 x 19-1/4 In. (1518 x 813 x 489mm)
90 Lbs. (41 Kg.)
656 Lbs. (298 Kg.)
68 Gal. (251 L)
20-1/2" X 45" (521 X 1143 mm)
15 In. (381mm)
49 Lbs./Sq.Ft. (240 Kgs./Sq.m)
15.28
28
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
MERRICK
™
WHIRLPOOL AND SOAKING TUB
HIGH GLOSS ACRYLIC
MODEL 025-0144
32"
(813mm)
26"
(659mm)
21-1/2"
(546mm)
59-3/4"
(1518mm)
53-3/4"
(1365mm)
44-1/2"
(1130mm)
16"
(406mm)
2-3/4"
(69mm)
3-1/4"
(83mm)
1-1/2"
(38mm)
7-3/4"
(197mm)
3"
(76mm)
59-3/4"
(1518mm)
32"
(813mm)
19-1/4"
(489mm)
17-1/4"
(438mm)
spec_025-0144 Merrick WP-T Rev. B 3/16