Technical Specifications

C-E32
© 2016 Eljer
BY AMERICAN STANDARD
GENERAL SPECIFICATIONS FOR RIDGEFIELD™ WHIRLPOOL
58 x 38 x 23-1/2 In. (1473 x 965 x 597mm)
97 Lbs. (44 Kg.)
763 Lbs. (347 Kg.)
80 Gal. (303 L)
23" X 37" (584 x 940 mm)
19-1/2 In. (495mm)
62 Lbs./Sq.Ft. (306 Kgs./Sq.m)
24.44
35.68
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP.
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
RIDGEFIELD
™
WHIRLPOOL AND SOAKING TUB
HIGH GLOSS ACRYLIC
MODEL 025-0146
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF
BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM
PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1. These
measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
2"
(51mm)
58"
(1473mm)
38"
(813mm)
23-1/2"
(597mm)
21-1/2"
(546mm)
20-1/4"
(514mm)
58"
(1473mm)
19"
(482mm)
4"
(102mm)
4"
(102mm)
7-3/8"
(187mm)
50"
(1270mm)
38"
(965mm)
30"
(762mm)
4"
(102mm)
24"
(609mm)
42-1/2"
(1079mm)
spec_025-0146 RidgeeldWP-T Rev. B 3/16