Technical Specifications

C-E36

BY AMERICAN STANDARD

GEMINI

™

WHIRLPOOL AND SOAKING TUB

HIGH GLOSS ACRYLIC

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF

BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED FOR ADDITIONAL INFORMATION.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

OPTIONAL 3 WALL TILE FLANGE KIT AVAILABLE AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM

PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.

IMPORTANT: Dimensions of ﬁxtures are nominal and may vary within the range of tolerances established by IAPMO Z124.1.2

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

GENERAL SPECIFICATIONS FOR GEMINI™ WHIRLPOOL

60 x 60 x 21-1/2 In. (1524 x 1524 x 546mm)

130 Lbs. (59 Kg.)

863 Lbs. (392 Kg.)

88 Gal. (333 L)

31" X 44" (787 X 1118 mm)

17 In. (432mm)

41 Lbs./Sq.Ft. (201 Kgs./Sq.m)

30.56

50.75

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

BATHING WELL AT SUMP

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

MODEL 025-0143

spec_025-0143 GeminiWP-T Rev. 3 1/20