Installation Guide

Assembly Instructions for 6RMN

NOTE: USE TEFLON TAPE ON ALL THREADED CONNECTIONS

1. Shut off the main water supply valves before installation.

2. Thread the Brass Nipple into Supply Shank.

3.Insert Rubber Washers into Coupling Nuts. Thread faucet onto

90 degree elbow and tighten the Coupling nuts.

4. .

5.Tighten the Mounting Nuts.

6.Place Supply Line Nuts, Friction Rings, and Cone Washers onto

supply line coming out from floor. Connect the Brass Nipples and

tighten wrench tight. CAUTION:

Get Brass Nipples through the faucet holes

DO NOT OVERTIGHTEN.

Elizabethan

Classics

Rev.A

90 degree elbow

CAUTION: DO NOT OVER TIGHTEN NUTS - THIS CAN LEAD TO

STRIPPING OR CRACKING AND WILL VOID YOUR

WARRANTY.

NOTE: TO BE INSTALLED ONLY BY QUALIFIED, LICENSED PLUMBER

Brass Nipple

Tub Deck

Mounting Nut

Cone Washer

Friction Ring

Supply Line Nut

Faucet Hole

Coupling Nut

Rubber Washer

Supply Shank

NOTE : REQUIRE ECSSL STRAIGHT BATH SUPPLY LINES WHICH

INCLUDE SUPPLY LINE NUTS, FRICTION RINGS, AND CONE

WASHERS.

Faucet