Manual

Chapter 3
VX900-I2 USER MANUAL
27
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
Standard CMOS Setup
This option enables you to configure the system time and date, SATA devices, etc.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
Standard CMOS Setup


Date Fri 11/16/2012
Time 01 : 16 : 50
SATA1 ATAPI CDROM
SATA2 Hard Disk
Scroll to this item and press <Enter> to view the following screen:
SATA1
SATA1~2

This motherboard supports two SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.

F1:General Help
: Move F10: Save and Exit+/-/PU/PD: ValueEnter : Select
F9: Load Default Settings

ESC: Exit
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
SATA1 :
Help Item
Select the type
of device connected
to the system.
Primary IDE Slave
Device
Vendor
LBA Mode
PIO Mode
Async DMA
Ultra DMA
Type Auto
PIO Mode Auto
DMA Mode Auto
: ATAPI CDROM
: SONY DVD RW DRU-190S
: Supported
: 4
: MultiWord DMA-2
: Ultra DMA-5
F1:General Help
: Move F10: Save and Exit+/-/PU/PD: ValueEnter : Select
F9: Load Default Settings

ESC: Exit