Owner manual

3
Introducing the Motherboard
Expansion Options
The motherboard comes with the following expansion options:
One 32-bit PCI slot
Two IDE connectors which support four IDE devices
One floppy disk drive interface
One CF socket (optional)
The motherboard supports Ultra DMA bus mastering with transfer rates of 100/66/
33MB/s.
Onboard LAN (Optional)
Some hardware specifications and software items are subject to change
without prior notice.
The motherboard has a full set of I/O ports and connectors:
Two PS/2 ports for mouse and keyboard
Three serial ports
One VGA port
Four USB ports
Two LAN ports (LAN2 optional)
Audio jacks for microphone and line-out
Integrated I/O
BIOS Firmware
This motherboard uses Award BIOS that enables users to configure many system
features including the following:
Power management
CPU parameters
CPU and memory timing
The firmware can also be used to set parameters for different processor clock
speeds.
This motherboard may support either of the following LAN chipset:
Supports 100/10 Mb/s N-Way Auto negotiation operation
Half/Full duplex capability
Supports Wake-On-LAN(WOL) function and remote wake-up
Integrate 10/100/1000 transceiver
Supports PCI v2.3, 32-bit, 33/66MHz
Supports fully with IEEE802.3, IEEE802.3u and IEEE802.3ab