Install v.1 Owner's manual

Front-panel controls

Fig. 2 The functions of the front-panel controls

Control name Function

1 ODD Eject Button Pushing this button will eject the ODD Track tray, and pushing again will retract it.

2 PC Power Button Pushing this button will start the PC mode (boot into Windows).

3 Reset Button In the PC/EZ-Cinema mode pushing this button will reboot the system into PC mode.

4 Magic Tuner

unique tuner feature provided by the EZ-Buddie 2 for adjusting the volume and CPU

requency. The factory default of the tuner is for adjusting volume - turn clockwise to

increase the volume, and counterclockwise to decrease. When you want to adjust the

CPU frequency, just push the Magic Tuner once, which unlock the “LOCK” status, and

hen you can turn the tuner clockwise to increase the frequency (overclock) and

counterclockwise to decrease (downclock).（For the upper and lower limit of this

requency adjusting, please refer to following sections.）

How to overclock/downclock

1. Lightly push the Magic Tuner once.

2. Make sure the [EZ-Watcher clock adjust] of the [PC Health Status] item in the BIOS is

set to [Enabled] (default is [Disabled].).

3. Turn the tuner clockwise to increase the CPU FSB frequency, and counterclockwise

to decrease.

4. Push the tuner again to lock the resulted frequency. The lock will be confirmed by the