Owner's manual

Chapter 2:Hardware Installation

Chapter 2

Hardware Installation

Follow these instructions to install this AG200 Series VGA card.

Package Contents

Attention: This VGA Card series has five models. Please check

with your vendor to make sure you have bought the product you

really want.

Model Specification

AG200T8-D64 Xabre200+SiS301, 64MB DDR

AG200E8-D64 Xabre200, 64MB DDR

AG200SL-32 Xabre200, 32MB SDR

AG200SP-64 Xabre200, 64MB SDR

AG200F-64TD Xabre200+SiS301, 64MB DDR

AG200E4-D32 Xabre200, 32MB DDR

Your card package should contain the following items:

♦ This User’s Manual

♦ The VGA card

♦ Super software pack

♦ One cable (optional)

♦ One adapter (optional)

Unpacking

♦ The card contains sensitive electric components, which can be

easily damaged by static electricity, so the card should be left

in its original packing until it is installed.

♦ Unpacking and installation should be done on a grounded

anti-static mat. The operator should be wearing an anti-static

wristband, grounded at the same point as the anti-static mat.

♦ Inspect the card carton for obvious damage. Shipping and

handling may cause damage to your card. Be sure there are no

shipping and handling damages on the card before

proceeding.

DO NOT APPLY POWER TO YOUR SYSTEM IF THE

CARD HAS BEEN DAMANGE.