User guide

Chapter 3
A970M-A DELUXE USER MANUAL
47
Slam Time Mode (Auto)
This item enables you to set slam time mode, this option is only for RB-C3, BL-C3, DA-
C3.
VSSlamTime (Auto)
This item specifies the time to wait for voltage stabilization during altvid transitions
if a new VID is provided to the voltage regulator without ramping. 0:24N:3xDC [31:29].
Press <Esc> to return to the M.I.B. X Menu page.
Main Advanced Chipset M.I.B. X Boot Security Save & Exit
Set Memory Clock Mode.
Memory Control
Scroll to this item and press <Enter> to view the following screen:
Memory Clock Mode (Auto)
This item allows you to set memory clock mode.
+/- : Change Opt.
Enter/Dbl Click : Select

: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
ESC/Right Click: Exit

F4: Save & Exit
Memory Clock is (DDR3-1333/667 Mhz)
This item shows the information of memory clock.
Command Rate (Auto/1T)
This item allows you to set command rate.
Memory Control
Memory Clock Mode Auto
Memory Clock is : DDR3-1333/667Mhz
Command Rate Auto
tCL Auto
tRCD Auto
tRP Auto
tRAS Auto
tRC Auto
tRRD Auto
tRTP Auto
tWTR Auto
Command Rate 1T
tCL 9
tRCD 9
tRP 9
tRAS 24
tRC 33
tRRD 4
tRTP 5
Press <Esc> to return to the M.I.B. X Menu page.