Manual

OnBoard Parallel Port

This option specifies the base I/O port address of the parallel port on the motherboard.

Ø The settings are Auto (default value), Disabled, 378h, 278h, or 3BCh.

Parallel Port Mode

This option specifies the parallel port mode.

Ø The settings are Normal, Bi-dir, EPP or ECP (default value).

Parallel Port IRQ

This is only a display-only item and cannot be altered.

Parallel Port DMA Channel

This is only a display-only item and cannot be altered.

Change Supervisor Password

This field allows you to set the Supervisor password. To set the Supervisor password, highlight

this field and press the [Enter] key. The following dialog box appears:

Enter new supervisor password: